Coat EN ISO 11612 - ALWIT GmbH

P/N 40 - 0011.00 / 805.Z* 40 - 5011.00 / 805.Z*
40 - 0111.00 / 805.Z* 40 - 5111.00 / 805.Z*
40 - 0041.00 / 805.Z* 40 - 5041.00 / 805.Z*
40 - 0141.00 / 805.Z* 40 - 5141.00 / 805.Z*
Model
Coat
Material Nomex ® Comfort, 260 g/m², mat. 805.Z*
Lining without
Lining – code 00
Application Convective / radiant heat (e.g. in laboratories)
Temperature range < 370°C (beginning of combustion)
Packing unit 1 ea
Product packing PE bag, dark coloured
Dispatch packing Cardboard box
Storage Dry and dustfree, protected from light
Washing temperature 60°C
Cleaning P
Waste removal Recycling, depending on contamination by use
p/n 40-0111.00 / 805.1
Z* = colour code (on request, not all fabrics are
available in all colours)
ALWIT GmbH Phone email
P.O.Box 31 60 +49-2828 / 91 46 - 0 +49-2828 / 91 46 46 info@alwit.com
D-46434 Emmerich
P/N 40 - 0011.00 / 805.Z* 40 - 5011.00 / 805.Z*
40 - 0111.00 / 805.Z* 40 - 5111.00 / 805.Z*
40 - 0041.00 / 805.Z* 40 - 5041.00 / 805.Z*
40 - 0141.00 / 805.Z* 40 - 5141.00 / 805.Z*
General requirements Standard
6.2.1 Heat resistance ISO 17493
Shrinkage along/cross -0,7 / -0,7 %
Melting, Ignition no
6.3.2 Flame spread ISO 15025 A A1
6.4.2 Dimensional change ISO 5077 -1,9 / -1,7 %
6.5.1 Tensile strength ISO 13934-1 along: 1.550 N / cross: 930 N
6.5.2 Tear strength ISO 13937-2 along: 74 N / cross: 85 N
6.5.3 Burst strength ISO 13938-1
6.5.4 Seam strength ISO 13935-2
6.6 Waterproofness EN 343
6.9.2 Ph-value 6,0
7.2 Convective heat HTI24 ISO 9151 B1 5
7.3 Radiant heat RHTI24 ISO 6942 C1 10
7.4 Molten metal ISO 9185 (Al)
7.5 Molten metal ISO 9185(Fe) E1 66
8 Marking
ISO 13688
A1 B1 C1 E1
Notified Body IFA, Alte Heerstraße 111, D-53757 Sankt
Augustin
CE-type examination no. 2010 23155
Certification no. 10 01227
DuPont and Nomex ® are registered trademarks of E. I. du Pont de Nemours and Company or its
affiliates.
Coat EN ISO 11612
Info 40-011
Issue 12/2010

Coat from Nomex ® Comfort
ALWIT was the first company in Germany and probably in Europe which started the
production of Personal Protective Equipment (PPE) made of Nomex ® already in 1968.
Since then Nomex ® changed a lot but ALWIT has always been up to date, and is therefore
privileged to advise our customers on a high level of knowledge.
It is a matter of course that ALWIT signed the contract as partner of Nomex ® Quality
Programme (NQP) offered by Du Pont in order to manufacture PPE of Nomex ® on a high
level under control and approval by Du Pont.
Properties of PPE made from Nomex ® Comfort
� Inherently flame retardant (no impregnation needed)
� Insulating
� Resistant against chemicals
� Permanently antistatic (no impregnation needed)
� Comfortable *
� Easy care
� Economical
* Comfort can be even improved by a permanently hydrophilic finishing.
Design
Coats are manufactured according to usual German size table, and are available in all
sizes, including tall or short sizes.
Design is choosen by the classic lab – coat as described in DIN 61505 Form A, that has a
turn-down-collar, three patch pockets, back vent, and is closed by concealed buttoning.
Variations e.g. number of pockets, closure system etc. may be verified upon request of the
customer as far as these deviations are still covered by the certification according to EN
ISO 11612 or the desired quantity allows a new type approval procedure under
economical aspects.
ALWIT GmbH Phone email
P.O.Box 31 60 +49-2828 / 91 46 - 0 +49-2828 / 91 46 46 info@alwit.com
D-46434 Emmerich
Coat 40 - 0111.00 / 805.1
Differentiation code
0 = men
5 = women
Design
0 = without back vent
1 = with back vent
Closure system
1 = buttons
3 = zipper
4 = snap fastener
5 = touch and close fastener
Lining code
Material-No.
From there we receive basic models as following:
Design men women
2 hip-, 1 chest pocket, back vent, buttons Mod. 40-0111 Mod. 40-5111
2 hip-, 1 chest pocket, buttons Mod. 40-0011 Mod. 40-5011
2 hip-, 1 chest pocket, back vent, snap fastener Mod. 40-0141 Mod. 40-5141
2 hip-, 1 chest pocket, snap fastener Mod. 40-0041 Mod. 40-5041
Selection
Here descripted coats intend to protect first of all against convective heat (flames), but
also against radiant heat.
The correct selection of PPE shall be based on exact risk assessment done by the user.
Carrying out the risk assessment not only protective properties should be taken under
consideration but also ergonomic features.
The technical report for selection, use, care and maintenance, CEN/TR 14560, may offer
further assistance.
Detailed information for selection, use, care and maintenance are given in info 0-150.
Coat EN ISO 11612
Info 40-011
Issue 12/2010