Installation Instruction
Installation Instruction
Installation Instruction
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Components List<br />
N o . Component Quantity<br />
31<br />
32<br />
33<br />
34<br />
35<br />
36<br />
37<br />
38<br />
39<br />
40<br />
41<br />
42<br />
43<br />
44<br />
45<br />
46<br />
47<br />
48<br />
49<br />
50<br />
51<br />
Connection pipe<br />
Cover<br />
Sealing strip<br />
Net<br />
Plate<br />
Spring shim<br />
Cross-head screw<br />
Seat<br />
Union<br />
O-ring<br />
Seat<br />
Cross-head screw<br />
Plastic sleeve<br />
Spout<br />
Female allen screw<br />
Index<br />
Cross-head screw<br />
Setting pin<br />
Plate<br />
Safe cover<br />
Index<br />
1<br />
1<br />
1<br />
8<br />
1<br />
2<br />
2<br />
1<br />
1<br />
3<br />
1<br />
4<br />
4<br />
1<br />
2<br />
4<br />
4<br />
2<br />
1<br />
1<br />
1<br />
Flow rate Curves<br />
L/min<br />
35<br />
0<br />
0.1 0.2 0.3 0.4 0.5 1 2 3<br />
Note<br />
Test pressure: 1.6MPa (16bar)<br />
Flow pressure:<br />
Min 0.05MPa<br />
Max<br />
1.60MPa<br />
Recommended pressure:<br />
0.1MPa to 0.8MPa (1 to 8 bar)<br />
1.Ensure proper cleaning of the water supply pipe before<br />
installation to avoid any jammed.<br />
2.The cold-water supply must be connected on the right and<br />
the hot-water supply must be connected to the left.<br />
3.Check the installation dimensions according to the Figure and<br />
ensure it is installed correctly.<br />
o<br />
4.Hot-water inlet temperature must not be over 80 C.<br />
3/8 8/8<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
Bar<br />
PZMF159800<br />
2010.12.20
Change language