KOMET® – Solid Drilling - komet group
KOMET® – Solid Drilling - komet group
KOMET® – Solid Drilling - komet group
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Applications:<br />
- For diameter range 10 to 20.5 mm<br />
- Internal coolant supply<br />
- Suitable for use with steel, cast metal and<br />
stainless materials<br />
- Replaceable head system enables use with a<br />
wide variety of sections and coatings.<br />
Rotating application<br />
in a machining centre<br />
Material: 1.6758 (23MnNiMoCr5-4)<br />
vc = 46 m/min · f = 0.1 mm/rev<br />
KOMET KUB K2®<br />
Cylindrical Shank ISO 9766<br />
x 10 <strong>–</strong> 20.5 mm, R.H. cutting<br />
<strong>Drilling</strong> depth 3×D, 5×D, 7×D<br />
Technical Notes<br />
Guideline values for solid drilling<br />
Technical Informations<br />
Reduced cutting speed due to very low<br />
coolant pressure.<br />
Good process reliability.<br />
Please note: When using the KUB K2® in a hydraulic<br />
expansion chuck, use a reducing sleeve.<br />
x 20, x 25, x 32<br />
x 12, x 16, x 20<br />
Page<br />
30 <strong>–</strong> 35<br />
36<br />
37<br />
29<br />
1
Change language