Illustration Index - Elite Simulation

Elite Evolution S923 FNPT II MCC
©1990 - 2010, Elite Simulation Solutions AG, all rights reserved
January 2010
section page 46 of 58
9 Installation
9.1 Site Layout
The operator shall consider the following:
� access doors with at least 85 cm width and 2m height
version
� sufficiently wide access corridors. Preferably you can provide a plan copy of the room
and the access to the room to evaluate whether the material can be carried into
room.
� the Elite Evolution S923 FNPT II MCC Mock up with instructor station enclosure size
is 2.50 m x 4.25 m x 2.40 m (w x l x h) and includes a mounting unit for the visual
projection system and a visual projection canvas.
� Two ISDN channels or better (DSL) connection for remote access
� Minimum required room space is 3.5m x 5.0m x 2.5m (w x l x h) please note that a
multi-channel Visual set up requires more space.
9.2 Power
The Elite Evolution S923 FNPT II MCC Complex will operate on 110 / 230 V / 50 Hz electric
power. All interfacing equipment (transformers, inverters, etc.) will be provided by the
manufacturer.
The customer shall provide 380 VAC / 50 HZ three phase power through an Europlug CEE
type (32 A) 3 LNPE and related surge protection.
The total electric power consumption for an S923 with one visual channel is maximally 10
kW and consists of the following separable circuits:
� Control loading Unit ~4 kW
� Visual System ~1 kW (one channel)
� Cockpit panel / IOS ~2.5 kW
9.3 Environmental Considerations
Operating
� Temperature: +10 ° C - +25 ° C (Monitor, Projector)
� Humidity: 20 % - 80 %, non-condensing
� Heat dissipation: STD without pilots/instructor 14000 Btu/hr
� The light environment of the STD room must be controllable
3.1