wireless adsl2+ modem router quick install guide - Amazon Web ...

This wizard can be run in Windows 98SE/Me/2000/XP/Vista/7. The following procedures
are operated in Windows XP. (Procedures are similar for Windows 98SE/Me/2000/Vista/7.)
1. Insert the enclosed setup CD into your CD-ROM drive. The Autorun.exe program
should be executed automatically. If not, run Autorun.exe manually from the “Auto
run” folder on the CD.
2. When the initial screen displays, click “Setup Wizard.”
3. The first Setup Wizard screen will display, indicating that the wizard is running and
searching for the router.
• If the router is found, the wizard will display the Please Select ISP screen (see the
Setting the ISP sections).
• If the router can’t be found, enter the IP address and the password of the router
(1234) on the Logon screen to search again. Click “Next” to continue.
NOTE: The wizard will automatically select the country you’re in by checking the
language of the operating system in your computer and then advance to the Please
Select ISP screen.
Setting the ISP Automatically
If the wizard finds the ISP, follow the steps below and
the wizard will configure the ISP settings automatically.
1. Select the ISP displayed for your ADSL.
2. When the next screen displays, enter the username
and password that your ISP has provided, if needed. Click “Next.”
ENGLISH
3