2-in-1 Fabric Steamer & Iron - Air & Water

More documents

Recommendations

Info

ENGLISH 6 Top Innovations, Inc. PRODUCT INFORMATION • The Pole Top (1) connects to the top section of the Telescopic Pole. The Clothes Hanger Hook is a part of the Pole Top. • The Clothes Hanger Hook (1A), which is part of the Pole Top, is designed to support garments hung from a clean rust-free hanger. • The Telescopic Pole (2) connects to the unit at the Pole Base. The Telescopic Pole is divided into four sections, three of which can be extended and retracted for user comfort and convenient storage. The Pole Top, Nozzle Station and Cord Clasp all connect to the Telescopic Pole. • The 3 Extension Locks (2A) are used to adjust the length of the Telescopic Pole. • The Pole Base (2B), located on top of the main unit body, is the threaded receptor into which the Telescopic Pole is inserted and secured. • The Nozzle Station (3) connects to the Telescopic Pole. The Nozzle Holder is a part of the Nozzle Station. • The Nozzle Holder (3A), which is part of the Nozzle Station, is designed to provide a safe, convenient place to rest the Steam Nozzle when not in use. • The Cord Clasp (4) connects to the Telescopic Pole and securely holds the power cord when not in use, making the unit safer and easier to store. • The Water Tank (5) holds water to be used by the unit for production of steam, up to a maximum capacity of 48 oz. (1,420 ml.). It can be refilled while the unit is still on for continuous-fill operation. • The Water Tank Lid (5A) covers the Water Tank, and must be removed in order to add or empty water. The Water Tank Lid only fits on the Water Tank correctly one way. • The Lighted On/Off Switch (6) turns the unit on and off. When set to the “ON” position, it illuminates to provide a clear visual indication that the unit is receiving power. • The Self-Clean Switch (7) changes the units function from regular steaming mode to self-cleaning mode. The Self-Clean Switch should remain set to “OFF” for normal operation. • The Hose (8) directs water from the Water Tank to the Steam Nozzle, while remaining safe and flexible for a variety of situations. • The Steam Nozzle (9) is where water is heated and converted into a flow of hot steam. • The Handle (9A) is designed to stay relatively cool while providing the optimum level of safety and user comfort. • The Heating Indicator Light (10) illuminates when the unit is turned on, indicating that the heater in the Steam Nozzle is active. The Light will turn off once the Steam Nozzle and Ironing Plate are fully heated. NOTE: During operation, the Heating Indicator Light may cycle on and off as the unit works to maintain a steady temperature. • The Steam Button (11) is pressed in order to start and stop the flow of steam from the Steam Nozzle. For a continuous flow of steam, the Steam Button may either be held down manually or locked down using the Steam-Lock Switch. • The Steam-Lock Switch (11A) may be slid forward while the Steam Button is pressed down, in order to lock the Steam Button in place for hands-free continuous steam. • The Ironing Plate (12) is a heated aluminum-alloy surface, treated with a non-stick coating. The Ironing Plate functions similarly to a conventional pressing iron, and is designed for eliminating stubborn, deep-set wrinkles and making crisp, professional creases. • The Fabric/Lint Brush (13) slides over the Ironing Plate. The Fabric/Lint Brush is designed to work with steam in order to remove lint and other small particles from materials. • The Press Pad (14) is designed to fit onto your hand, allowing you to support fabrics for a more thorough steaming and to assist in creating creases. The Press Pad also protects your hand from being burned by hot steam or the Ironing Plate.
ASSEMBLING THE 2-IN-1 FABRIC STEAMER & IRON TELESCOPIC POLE The Telescopic Pole is made up of four sections (FIGURE 1): • TOP (SECTION 1) • MIDDLE-TOP (SECTION 2) • MIDDLE-BOTTOM (SECTION 3) • BOTTOM (SECTION 4) SECTIONS 1, 2 & 3 are adjustable in length. By using the Extension Locks, these sections may be expanded or collapsed in order to achieve the desired length. Refer to Adjusting Telescopic Pole section below for more details. NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This section includes the COUPLING, which secures the Telescopic Pole to the Pole Base. CONNECTING TELESCOPIC POLE 1. Insert SECTION 4 of Telescopic Pole into Pole Base (FIGURE 2-A). 2. Tighten coupling on Telescopic Pole by turning it in a clockwise direction (FIGURE 2-B). This will secure Telescopic Pole in place. NOTE: To properly balance unit, align Telescopic Pole so that clothes hanger hook on Pole Top faces towards front of steamer (FIGURE 2-C). Nozzle Station will attach on opposite side of Telescopic Pole (refer to Page 9 for details). A B FIGURE 1 FIGURE 2 Top Innovations, Inc. FRONT C 7 ENGLISH
Page 1 and 2: MODEL SF-434 2-in-1 Fabric Steamer
Page 3 and 4: IMPORTANT SAFETY INSTRUCTIONS WARNI
Page 5: PRODUCT INFORMATION The following f
Page 9 and 10: ASSEMBLING THE 2-IN-1 FABRIC STEAME
Page 11 and 12: USING THE 2-IN-1 FABRIC STEAMER & I
Page 13 and 14: PROPER STORAGE Preparing your 2-in-
Page 15 and 16: CUSTOMER SUPPORT & PRODUCT SPECIFIC
Page 17 and 18: MODELO SF-434 Fabrica de Vapor y Pl
Page 19 and 20: INSTRUCCIONES IMPORTANTES DE SEGURI
Page 21 and 22: INFORMACION DEL EQUIPO • El Tapó
Page 23 and 24: ENSAMBLE DE LA FABRICA DE VAPOR Y P
Page 25 and 26: USANDO LA FABRICA DE VAPOR Y PLANCH
Page 27 and 28: USANDO LA FABRICA DE VAPOR Y PLANCH
Page 29 and 30: SOLUCION DE PROBLEMAS PROBLEMA POSI
Page 31 and 32: INFORMACIÓN DE GARANTÍA Usted deb

2-in-1 Fabric Steamer & Iron - Air & Water

Create successful ePaper yourself

Delete template?

Save as template?