CDK-US - bei Berner Torantriebe
CDK-US - bei Berner Torantriebe
CDK-US - bei Berner Torantriebe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10. EXAMPLES OF CONTROLLING ENTRANCES<br />
10.1 CONTROLLED ENTRANCE OR EXIT<br />
This solution is recommended when you want to enter a reserved area in just one direction activating a recognition command<br />
(radio control, proximity key, magnetic keys, etc.).<br />
The vehicle approaches<br />
the reserved area.<br />
- Connect the N.O. contact of the S1 loop receiver to input 27-29.<br />
- Connect the N.O. contact of the S2 loop receiver to input 28-29.<br />
- The dimensional values of the loops are only approximate.<br />
We suggest installing the “RM” metal mass detector.<br />
DIMENSIONS<br />
- 17 -<br />
When the vehicle is on loop S1 the<br />
device will move down only after a<br />
recognition command.<br />
If the device is moving back up<br />
and you want to lower it again<br />
the vehicle must be on loop S1<br />
and then you must activate the<br />
recognition command.<br />
When the vehicle is no longer<br />
on loop S2 the device will move<br />
back up.<br />
Loops S1 and S2 also have a safety function in that they will not let the device move all the time the vehicle is on top.<br />
ONE DIRECTION<br />
ONE DIRECTION<br />
ONE DIRECTION<br />
ONE DIRECTION<br />
1 2 3 4 5 6 7 8 9 10<br />
Setting the dip<br />
switches
Change language