CDK-US - bei Berner Torantriebe
CDK-US - bei Berner Torantriebe
CDK-US - bei Berner Torantriebe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10.2 AUTOMATIC ENTRY OR EXIT<br />
This solution is recommended when you want to allow entry to a reserved area, entering or leaving without using the recognition<br />
commands, allowing transit of vehicles in just one direction.<br />
When the vehicle is on loop S0<br />
the device receives consent<br />
from loop S1 to move down.<br />
When the vehicle is on top<br />
of loops S0+S1 the device<br />
moves down automatically.<br />
When the vehicle is no longer<br />
on loop S2 the will move<br />
back up.<br />
Loops S1 and S2 also have a safety function in that they will not let the device move all the time the vehicle is on top.<br />
ONE DIRECTION<br />
DIMENSIONS<br />
- Connect the N.O. contact of the S0 loop receiver to input 27-29.<br />
- Connect the N.O. contact of the S1 loop receiver to input 26-29<br />
and the N.C. contact to input 21-29.<br />
- Connect the N.O. contact of the S2 loop receiver to input 28-29.<br />
- The dimensional values of the loops are only approximate.<br />
We suggest installing the “RM” metal mass detector.<br />
*<br />
ONE DIRECTION<br />
ONE DIRECTION<br />
ONE DIRECTION<br />
- 18 -<br />
29<br />
1 2 3 4 5 6 7 8 9 10<br />
Setting the dip<br />
switches<br />
21<br />
26<br />
Detail of the connections between the “RM”<br />
presence relay and the control unit.<br />
*
Change language