Operator'sIVianual - Ppe-pressure-washer-parts.com
Operator'sIVianual - Ppe-pressure-washer-parts.com
Operator'sIVianual - Ppe-pressure-washer-parts.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KNOWYOURPRESSUREWASHER<br />
[_<br />
Readthe Operator's Manual and safety rules before operating your <strong>pressure</strong> <strong>washer</strong>.<br />
Comparethe illustrations with your <strong>pressure</strong><strong>washer</strong> to familiarize yourself with the locations of various controls and<br />
adjustments. Savethis manual for future reference.<br />
A - Spray Gun-- Controls the application of water onto<br />
cleaning surface with trigger device, includes trigger lock.<br />
B - Spray Tips- Detergent,0°, 25°, 15° and 40°: for<br />
various high <strong>pressure</strong> cleaning applications.<br />
C - Accessory Tray -- Provides convenient storage for<br />
accessories, such as gun, spray tips, etc.<br />
D - Nozzle Extensionwith QuickConnect --<br />
switch betweenfive different spray tips.<br />
Allows you to<br />
E - High Pressure Hose-- Connectone end of hose to water<br />
pump and the other end to spray gun.<br />
F - Warning/Operating Instructions Tag -- identifies hazards<br />
and proper procedure to start/stop <strong>pressure</strong> <strong>washer</strong>.<br />
G - Fuel Tank -- Fill tank with regular unleadedfuel. Always<br />
leave room for fuel expansion.<br />
H - Choke Lever-<br />
Usedwhen starting a cold engine.<br />
J- Fuel Valve-- Used to turn fuel supply on and off to<br />
engine.<br />
I( - Throttle Lever -- Sets engine in starting mode for recoil<br />
starter and stops a running engine.<br />
L - Air Filter -- Protects engine by filtering dust and debris<br />
out of intake air.<br />
M - Recoil Starter --<br />
Usedfor starting the engine manually.<br />
N - DetergentSiphoning Tube/Filter -- Useto siphon<br />
<strong>pressure</strong><strong>washer</strong> safedetergents into the low <strong>pressure</strong><br />
stream.<br />
P - Automatic Cool DownSystem -- Cycleswater through<br />
pump when water reaches125°-155°F. Warm water wiii<br />
discharge from pump onto ground. This system prevents<br />
internal pump damage.<br />
R - Water Inlet --<br />
S - Oil Drain --<br />
Connectionfor garden hose.<br />
Drain engine oil here.<br />
T- Oil Fill -- Checkand add engine oil here.<br />
U - High Pressure Outlet --<br />
hose.<br />
V - Pump --<br />
Items Not Shown:<br />
Develops high <strong>pressure</strong>.<br />
Connection for high <strong>pressure</strong><br />
Identification Label (near rear of base plate) -- Provides<br />
model and serial number of <strong>pressure</strong><strong>washer</strong>. Pleasehave<br />
these readily available if calling for assistance.<br />
Engine Identification -- Provides model, type and code of<br />
engine. Pleasehave these readily available if calling for<br />
assistance.