Template BA B168xH238 - Hörmann

ENGLISH
Table of contents
A Articles supplied...................................................... 2
B Tools needed for assembly..................................... 2
1 About These Instructions..................................... 23
1.1 Further applicable documents................................ 23
1.2 Warnings used......................................................... 23
1.3 Definitions used....................................................... 23
1.4 Symbols used.......................................................... 23
1.5 Abbreviations used.................................................. 24
2 Safety Instructions.......................................... 24
2.1 Intended use............................................................ 24
2.2 Non-intended use.................................................... 24
2.3 Fitter qualification.................................................... 24
2.4 Safety instructions for fitting,
maintenance, repairs and
disassembly of the door system............................. 24
2.5 Safety instructions for fitting................................... 24
2.6 Safety instructions for initial
start-up and for operation....................................... 25
2.7 Safety instructions for using
the hand transmitter................................................ 25
2.8 Approved safety devices......................................... 25
2.9 Safety instructions for inspection
and maintenance..................................................... 25
3 Fitting...................................................................... 25
3.1 Inspect door/door system....................................... 25
3.2 Clearance required.................................................. 25
3.3 Fitting the garage door operator............................. 26
3.4 Fitting the operator boom....................................... 26
3.5 Fixing the warning sign........................................... 27
3.6 Garage door operator electrical connection........... 27
3.7 Connecting additional
components/accessories........................................ 27
4 Putting into Service............................................... 28
4.1 Putting the operator into service............................. 28
4.2 Setting additional functions
via the DIL switches................................................ 29
5 Radio....................................................................... 31
5.1 Hand transmitter HSM 4......................................... 31
5.2 Integral radio module.............................................. 32
5.3 External receiver ..................................................... 32
5.4 Excerpt from the declaration
of conformity for the receiver.................................. 32
6 Operation............................................................... 32
6.1 Instructing users...................................................... 33
6.2 Function check........................................................ 33
6.3 Normal operation..................................................... 33
6.4 Manual operation.................................................... 33
6.5 Operating after a mechanical release...................... 33
6.6 Behaviour during a power failure
(without emergency battery).................................... 34
6.7 Behaviour following a power failure
(without emergency battery).................................... 34
6.8 Mains failure bridging using
an emergency battery ............................................. 34
6.9 Operator light messages......................................... 34
6.10 Error messages/diagnostic LED.............................. 34
7 Inspection and Maintenance................................ 35
7.1 Replacement bulb................................................... 35
8 Optional Accessories............................................ 35
9 Dismantling and Disposal..................................... 35
10 Warranty Conditions............................................. 35
10.1 Performance............................................................ 36
11 Excerpt from the Declaration
of Incorporation..................................................... 36
12 Technical Data....................................................... 36
13 Overview of DIL Switch Functions....................... 37
14 Overview of Errors and Error Elimination........... 38
Illustrated Section..................................... 133
Dissemination as well as duplication of this document and the
use and communication of its content are prohibited unless
explicitly permitted. Noncompliance will result in damage
compensation obligations. All rights reserved in the event of
patent, utility model or design model registration. Subject to
changes.
22 TR10A033-E RE / 03.2010