MODELADO Y SIMULACION DE UN HORNO ELECTRICO ... - CEA

[4] Chapman, A.J., (1990). Transmisión de calor.3rd Edition. Bellisco.[5] D’Azzo, J.J, and C.H. Houpis, (1995). LinearControl. System Analysis and design. 4th ed.McGraw-Hill.[6] García-Sanz, M. (1997). A reduced model ofcentral heating systems as a realistic scenariofor analyzing control strategies. Appl. Math.Modelling. Vol 21, September, pp.535-545.[7] García-Sanz, M. and I. Egaña (2002).“Quantitative Non-diagonal Controller Designfor Multivariable Systems withUncertainty”.International Journal of Robustand Non-Linear Control. Isaac HorowitzSpecial Issue, Part 2. Nº 12, pp. 321-333. JohnWiley & Sons. USA. ISSN: 1049-8923.[8] Holman, J.P.,(1998). Heat transfer.8 th Edition.McGraw-Hill Companies,Inc.[9] Houpis, C.H., and G.B. Lamont, (1985). DigitalControl Systems: Theory, Hardware, Software.2nd Edition, McGraw-Hill.[10] Houpis, C.H. and S. J. Rasmussen (1999).“Quantitative Feedback Theory Fundamentalsand Applications”. Marcel Dekker, New York,ISBN: 0-8247-7872-3.[11] Horowitz I, and M. Sidi, (1980).Practical designof feedback systems with uncertainmultivariable plants. International Journal ofSystems Science 1980; 11(7): 851-875.[12] Hudson, G., and C.P. Underwood, (1999). Asimple building modeling procedure forMatlab/Simulink. Proceedings of the 6thICBPS. pp: 777-783.[13] Ljung, L. (1987). System Identification:theoryfor the user. Prentice Hall Information andSystem Science Series.[14] Ljung, L.(1997). System Identification ToolboxUser’s Guide. The Mathworks, Inc.[15] M.Torres Diseños Industriales, S.A. Crta.Pamplona-Huesca, Km. 9. 31119 Torres deElorz (Spain).http://www.mtorres.es[16] Pintelon, R., and J. Shoukens, (2001). SystemIdentification: a frequency domain approach.IEEE Press[17] Siflexa Tecnología Tratamiento. PolígonoIndustrial. Masia D’Espi 46930 (Spain )[18] Wellstead, P.E. Introduction to Physical SystemModelling. Academic Press, New York, 1979.Figura 11 – Planta y perfil del horno industrial Siflexa