Intenso MEDIADESIGNER

Changing the Display Mode
While watching a picture or during the slide show you can change the display mode by repeatedly pressing the [4:3/16:9] button on the remote
control.
� 4:3: With this selection a picture which is saved in the 16:9 or a larger format is stretched and displayed as full screen picture.
� 16:9: With this selection a picture which is saved in the 16:9 or a larger format is displayed in its original format with a black bar at the
Please note:
upper and lower margin.
� A photo which is saved in the 4:3 format can only be depicted in the format 4:3.
� This function is not available with photos whose resolution is lower than 1024 X 768 pixels.
GB - 14