Intenso MEDIADESIGNER

Copying Files
1. Now please select the file using the [�],[�] buttons on the DF or the ▲,▼ buttons on the remote control and press the
[�] button on the DF or the � button on the remote control. A checkmark � appears next to the file. To select more
than one file, please repeat these steps.
2. Please press the OSD-button on the remote control. Now the display shows the options Copy and Delete.
3. Please use the [�],[�] buttons on the DF or the ▲,▼ buttons on the remote control to select Copy and press the [�]
button on the DF or the OK-button on the remote control. Additional storage mediums available are shown in the display.
4. Please use the [�],[�],[�],[�] buttons on the DF or the �, �, �, � buttons on the remote control to select the
relevant storage medium and press the [�] button on the DF or the � button on the remote control to select the desired
storage medium and sub-directory.
5. Press the [�] button on the DF or the OK-button on the remote control to start the copy process.
6. Repeatedly press the [�] button on the DF or the OK-button on the remote control to confirm the “Complete” message.
Please note:
� If your desired storage medium does not appear in the list, this may be due to the fact that this medium
is read-only. Please remove the read-only mode and try restarting the copy process.
GB - 22