37-0771 HR1250E1 CM-1250-0JEH ENGLISH.indd - John Deere

SHUTDOWN
IMPORTANT: Shutdown procedures should be followed
at the end of each cleaning operation.
1. If a detergent was used, place detergent inlet strainer
in CLEAN water and operate trigger to spray water for
a period of three minutes. This will flush the system of
detergents and help prevent the detergent valve from
sticking or corrosion.
2. Turn unit off and unplug washer.
3. Turn inlet water supply off. Squeeze trigger momentarily
to relieve pressure. Disconnect hoses.
4. Allow motor to cool, then wipe washer down with a damp
cloth.
Operating the Washer
Operator’s Manual 25