operating instructions - AJ Madison
operating instructions - AJ Madison
operating instructions - AJ Madison
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TROUBLESHOOTING<br />
You can solve many common Ice Maker problems easily, saving you the cost of a possible service call. Try the suggestions<br />
below to see if you can solve the problem before calling the servicer.<br />
1) The Ice Maker does not<br />
operate.<br />
2) The ice is not big<br />
enough or melts too<br />
quickly.<br />
3) Ice Maker Alarming<br />
4) Vibrations<br />
5) Noise<br />
PROBLEM<br />
6) Water leakage from<br />
ice maker.<br />
POSSIBLE CAUSE<br />
• Not plugged in<br />
• The appliance is turned off<br />
• The circuit breaker tripped or fuse has<br />
been blown.<br />
• The ambient temperature is too high.<br />
• The door is opened too often.<br />
• The door is not closed completely.<br />
• The door gasket does not seal properly.<br />
• Set the incorrect mode<br />
• Too much dust on the condenser<br />
• Outside water tank is full<br />
• Not enough water<br />
• Check to assure that the Ice Maker is<br />
level.<br />
• The rattling noise may come from the<br />
flow of the refrigerant, which is normal.<br />
• As each cycle ends, you may hear<br />
gurgling sounds caused by the flow of<br />
refrigerant in your Ice Maker.<br />
• Contraction and expansion of the inside<br />
walls may cause popping and crackling<br />
noises.<br />
• The ice dispensing during every cycle<br />
may cause little noise<br />
• The water flow noise during ice maker<br />
normal operation;<br />
• The Ice Maker is not level.<br />
• The water inlet pipe in the back is too<br />
loose<br />
• The water outlet pipe in the back is too<br />
loose<br />
12