operating instructions - AJ Madison

SETTING THE TEMPERATURE
CONTROLS
OPERATING INSTRUCTIONS
1. Please insure the water pipe is well connected to the
ice maker and keep the switch open.The factory setting
of the ice maker is set to make medium ice, if you need
to revise the ice size, you can press buttons
Small Med Large the relevant Indicator light
will open.
On / Off
2. If you want to stop making ice, please press
button for about 3 seconds, all the indicator lights
will go off and indicator
light will keep on flashing. If you want to return to
making ice, you only need to press the button one
more time.
DOOR REVERSAL
INSTRUCTIONS
This appliance has the capability of the door opening from
either the left or the right side. The unit is delivered to you
with the door opening from the left side. Should you desire
to reverse the opening direction, please follow
these instructions.
Fig. A A Fig. B B
1 2 3 4
7
ICE BOX
Fig. CCFig. DDFig. EE
5
6
7
Your ice box is designed to be easily taken out, if you
want to take it out. Lift up the front part of the box then
simply pull it out. (see picture below)
8
5
4
1. Screws
2. Bottom hinge (Right)
3. Door axis
4. Door
5. Top hinge (Right)
6. Lock screws
7. Top hinge (Left)
8. Bottom hinge (Left)