CRONOTERMOSTATO A RELÈ DA INCASSO - Gewiss
CRONOTERMOSTATO A RELÈ DA INCASSO - Gewiss
CRONOTERMOSTATO A RELÈ DA INCASSO - Gewiss
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
USER INSTRUCTIONS<br />
Setting parameters<br />
Press the SET/PROG key once to set the parameters.<br />
The message “SET” is displayed on the VDU.<br />
The symbol or starts to blink at the same time.<br />
At this point the following can be modified in sequence:<br />
- air conditioning/heating operating type<br />
- the day of the week<br />
- hours<br />
- minutes<br />
- temperature unit of measurement<br />
- Set point T1<br />
- Set point T2<br />
- Set point T3<br />
- antifreeze/high temperature protection temperature value<br />
- self-learning activation (only available in “heating” operating mode)<br />
- differential regulation value<br />
The value of each parameter is confirmed by pressing the MODE key.<br />
Exit from the setting phase is done by pressing the SET key again or, automatically, 30 seconds<br />
after the last key entry.<br />
30
Change language