69-2413EF-01 - Humidifier - Jackson Systems

Water Supply and Drain Connections
STEP ONE: Connect the Water Supply
Use hot or cold water.
1
Cut the water line so it reaches from the humidifier to
the main water supply tap
Insert the water line into the humidifier supply fitting.
Insert it fully, and apply modest pull pressure to
ensure a tight fit.
2
MCR29880
PLUMBING
STEP TWO: Tap into a Water Line
T-fitting
Manual Shutoff
Valve
Water Supply
Line
Saddle Valve
M29605
• Consult local codes for proper plumbing.
• Use the saddle valve provided or a T-fitting and
manual shutoff valve to tap into the water line.
• Refer to the literature included with the valve you
chose and the local plumbing codes. Use proper
technique for the valve.
• Connect the other end of the humidifier water line
to the water valve.
Humidifier 69-2413EF—01 13