VOLTA 100 / VOLTA 133 Notice de montage - Sammode

VOLTA 100 / VOLTA 133
Replacement lighting
Automatic Testing System:
description and instruction notes
VOLTA light fittings are provided with an emergency unit able to run tests automatically, in order to check the
working order of the emergency system:
- Function test (30 seconds): Once a week, it checks the good working order of components, including lamps.
- Duration test (1 or 3 hours): Once a year, it determines whether the batteries are able to fulfill the
requirements.
When possible, these tests are designed to happen during a period of non-occupancy, in order to avoid
annoyance. The test result is indicated by the colour of the LED inside the luminaire:
LED colour Status What must be done ?
permanent green Everything is OK Nothing
fast blinking green
(0,1s on / 0,1s off)
Function test in progress
Nothing
slow blinking green
(1s on / 1s off)
Duration test in progress
Nothing
permanent red
slow blinking red
(1s on / 1s off)
fast blinking red
(0,1s on / 0,1s off)
Lamp failure
Open circuit, or lamp default
Battery failure
Battery failed the duration test or the
function test
Incorrect charging current
Batteries cannot charge
Change the lamp if needed, or check the
position of the lamp
If batteries are new, the connection
poles may have been inverted.
If not, batteries need to be changed.
Batteries need to be changed.
N.B.: After commissioning, the luminaire is designed to launch a commissioning test in order to check the
good working order of components and the emergency duration. This test will run from 5 to 30 days after the
commissioning of luminaires.
- WARNING: AFTER COMMISSIONING, DO NOT FORGET TO RECONNECT THE BATTERY.
- AFTER EACH RELAMPING, RECONNECT THE CONNECTOR AND PUSH THE RED BUTTON TO
LAUNCH A 30 SECONDS AUTO-TEST. THE LED LIGHT MUST THEN GO PERMANENT GREEN.
Sammode Sammode SA SA
SAT SAT Gamme Gamme VOLTA VOLTA
24 24 rue rue des des Amandiers, Amandiers, F-75020 F-75020 Paris Paris 3/4 4/4 Octobre Octobre 2011 2011