VOLTA 100 / VOLTA 133 Notice de montage - Sammode

More documents

Recommendations

Info

VOLTA 100 / VOLTA 133 Replacement lighting Automatic Testing System: description and instruction notes VOLTA light fittings are provided with an emergency unit able to run tests automatically, in order to check the working order of the emergency system: - Function test (30 seconds): Once a week, it checks the good working order of components, including lamps. - Duration test (1 or 3 hours): Once a year, it determines whether the batteries are able to fulfill the requirements. When possible, these tests are designed to happen during a period of non-occupancy, in order to avoid annoyance. The test result is indicated by the colour of the LED inside the luminaire: LED colour Status What must be done ? permanent green Everything is OK Nothing fast blinking green (0,1s on / 0,1s off) Function test in progress Nothing slow blinking green (1s on / 1s off) Duration test in progress Nothing permanent red slow blinking red (1s on / 1s off) fast blinking red (0,1s on / 0,1s off) Lamp failure Open circuit, or lamp default Battery failure Battery failed the duration test or the function test Incorrect charging current Batteries cannot charge Change the lamp if needed, or check the position of the lamp If batteries are new, the connection poles may have been inverted. If not, batteries need to be changed. Batteries need to be changed. N.B.: After commissioning, the luminaire is designed to launch a commissioning test in order to check the good working order of components and the emergency duration. This test will run from 5 to 30 days after the commissioning of luminaires. - WARNING: AFTER COMMISSIONING, DO NOT FORGET TO RECONNECT THE BATTERY. - AFTER EACH RELAMPING, RECONNECT THE CONNECTOR AND PUSH THE RED BUTTON TO LAUNCH A 30 SECONDS AUTO-TEST. THE LED LIGHT MUST THEN GO PERMANENT GREEN. Sammode Sammode SA SA SAT SAT Gamme Gamme VOLTA VOLTA 24 24 rue rue des des Amandiers, Amandiers, F-75020 F-75020 Paris Paris 3/4 4/4 Octobre Octobre 2011 2011
SCHEMA DE CABLAGE / WIRING SCHEME EMERGENCY UNIT TEST BUTTON LA PHASE Lswitch PERMET DE COMMANDER L’EXTINCTION DES LUMINAIRES SANS COUPER L’ALIMENTATION DE L’UNITE DE SECOURS. LA COMMANDE D’EXTINCTION PAR COUPURE TOTALE DE L’ALIMENTATION ENTRAINERAIT LE PASSAGE EN MODE SECOURU, ET A TERME LA DECHARGE DES BATTERIES. WARNING: Lswitch LINE ENABLES TO SWITCH THE LIGHT OFF WITHOUT STOPPING THE SUPPLY OF THE EMERGENCY SYSTEM. SWICHTING OFF BY STOPPING THE PERMANENT SUPPLY WOULD COMMUTE THE LUMINAIRE TO EMERGENCY MODE, AND WOULD EVENTUALLY DISCHARGE THE BATTERIES. Sammode SA SAT Gamme VOTA 24 rue des Amandiers, F-75020 Paris 2/4 Octobre 2011
Page 1 and 2: VOLTA 100 / VOLTA 133 Notice de mon
Page 3 and 4: 6. 7. 4G1,5/2,5 or 5G1,5/2,5 8. 9.
Page 5: VOLTA 100 / VOLTA 133 Eclairage de

VOLTA 100 / VOLTA 133 Notice de montage - Sammode

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?