Receiver Ampli-Tuner - Yamaha Hifi

FM/AM TUNINGManual tuningManual tuning is effective when station signals are weak.4 To tune in by direct frequency tuning, pressthe numeric buttons on the remote control toenter the frequency of the station.Enter only integers. For example, if you want to setthe frequency to 88.90 MHz, enter “8890”.Notes1 Rotate the INPUT selector on the front panel(or press TUNER on the remote control) toselect TUNER as the input source.2 Press FM or AM on the front panel (or FM orAM on the remote control) to select thereception band (FM or AM).FM or AM is displayed on the front panel display.3 Press TUNING jj / ii on the front panel (orTUNING H / I on the remote control) tomanually tune in to the desired station.NoteTUNERFM, AMINPUT selectorTUNING jj / iiFM, AMTUNING H / INumericbuttonsWhen you tune in to a station, the frequency of the receivedstation is shown in the front panel display.• When you press the numeric buttons on the remote controlduring preset tuning, a preset number is selected. Set the tuningmode to frequency tuning mode using TUNING jj / ii on thefront panel (or TUNING H / I on the remote control) beforepressing the numeric buttons.• “WRONG STATION!” is displayed on the front panel display ifyou enter a frequency that is out of receivable range. Make surethat the entered frequency is correct.BASIC OPERATION■ Improving FM receptionIf the signal from the station is weak and the sound qualityis not good, set the FM band reception mode to monauralmode to improve reception.OPTIONB / C / D / EENTERRETURN1 Press OPTION on the remote control whenthis unit is tuned in to an FM radio station.The Option menu for TUNER is displayed (see page32).2 Press B / C on the remote control to select“FM Mode”, and then press ENTER.yTo cancel the operation and return to the Option menu, pressRETURN on the remote control.BASICOPERATION English19 En