Logamax plus - Buderus

More documents

Recommendations

Info

2 Scope of delivery2 Scope of delivery3 Installation21121110To install the parts of the service kit in the appliance, thefollowing instructions must be adhered to.DANGER: gas explosion.B This appliance is not suitable for use withgas mixtures such as butane and LPG.3547983.1 Shutting down the applianceB Close the gas shut-off valve.66 720 641 697-002.2TDfig. 1Service kit with air ventThis service kit contains the following parts:1 gas supply pipe with seals, union nut and spring2 label (2x)3 tag for gas label4 tie wrap5 condensate trap6 bottle for water sample7 revision set air vent8 address label9 return box10 return form11 gas supply pipe instructions12 these instructionsfig. 2 Gas shut-off valve closedB Press the control panel cover to open.6 720 641 697-014.1TD6 720 641 697-003.1TDfig. 3Control panel coverB Switch off the appliance by setting the mains switch [1]to position "0".1001101209011013015090Eco0130140Aut0170190Aut0 1Reset16 720 641 697-12.1TDfig. 4Mains switch to „0FF“B Disconnect the electrical power to the appliance.B Set the thermostat or other operating control to thelowest setting.4Logamax plus GB142-24/30/45/60 - We reserve the right to make any changes due to technical modifications!
Installation3B Use the radiator key to unlock the two latches a quarterturn [1.].B Open the latches [2.].NOTICE: appliance damage due to incorrectlifting.B Do not hold the casing by the latches.3.3 Removing the condensate trapB Pull the condensate trap from the condensate plate[1.].B Loosen the condensate trap from the connection [2.]and remove it.B Remove the casing by lifting it upwards and thenpulling it forwards [3.].3.2.1.1.fig. 5Removing the casing2.6 720 641 697-004.1TDfig. 62.Removing the condensate trap6 720 641 697-005.1TD3.2 Removing the gas supply pipeNOTICE:B Do not dispose of the gas supply pipe.It has to be returned.B Remove the gas supply pipe according to figures 6 to11 of the gas supply pipe instructions ( fig. 1, [11]).B Fill out the gas label ( fig. 1, [2]).B Place the gas label on the tag ( fig. 1, [3]) andconnect it with the tie wrap ( fig. 1, [4]) to the old gassupply pipe.3.4 Draining the systemB Close the maintenance shut-off valves [1] and drain [2]the Logamax plus GB142.21 16 720 641 697-007.1TDfig. 7 Draining the Logamax plus GB142B Fill the bottle provided with the service kit ( fig. 1, [6])with some water of the heating system. Make surethere is no air left in the bottle.B Fill out the water sample label ( fig. 1, [2]) and placethe label on the bottle.Logamax plus GB142-24/30/45/60 - We reserve the right to make any changes due to technical modifications! 5
Page 1 and 2: Service kit instructions gas supply
Page 3: Safety and general instructions11 S
Page 7 and 8: Returning the gas supply pipe and w
Page 9 and 10: Remarques et consignes de sécurit
Page 11 and 12: Installation3B régler le thermosta
Page 13 and 14: Installation3B Contrôler l'absence
Page 15 and 16: 4NotesLogamax plus GB142-24/30/45/6

Logamax plus - Buderus

Create successful ePaper yourself

Delete template?

Save as template?