12.07.2015 Views

Manuale UNIFICATO Free EB-BT - Copertina (A5) - 10.2008.FH10

Manuale UNIFICATO Free EB-BT - Copertina (A5) - 10.2008.FH10

Manuale UNIFICATO Free EB-BT - Copertina (A5) - 10.2008.FH10

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

☹ The suction motor is turned off.☺ Activate it.☹ The recovery tank is full.☺ Empty it.☹ The suction motor is not receiving electric poweror is burned.☺ Check the connections and, for the latter case,replace the motor.8.6 INSUFFICIENT SUCTION☹ The recovery tank drain hose plug is not perfectlyclosed.☺ Close it correctly.☹ The suction hose, the squeegee conduit or theinspection compartment is clogged.☺ Clean out and remove any obstructions from theconduits.☹ There are significant differences in densityamong the various elements.☺ Replace the damaged battery.Always consult the battery and battery charger useand maintenance manual. If this does not solve theproblem, contact the authorised technical servicecentre.The manufacturer CANNOT solve problemscaused by using batteries and battery chargersthat were not directly supplied.8.7 THE BRUSH MOTOR OR THE SUCTIONMOTOR DOESN’T STOP☺ Stop the machine, cutting off the main powersupply and disconnecting the main battery connector,and contact the technical service centre.8.8 THE SQUEEGEE DOESN’T CLEAN OR DRYEFFICIENTLY☹ The squeegee blades are worn or are draggingsolid dirt.☺ Replace or clean them.☹ The squeegee adjustment is not correct; theadvancement must be exactly perpendicular to therunning direction.☺ Adjust the squeegee.☹ The suction hose or the squeegee conduit areclogged.☺ Clean out and remove any obstructions from theconduits.8.9 THE BATTERY CHARGER DOESN’T WORK☹ The battery charge doesn’t start .☺ Check that the battery charger is connected tothe battery. Consult the battery charger manual.8.10 THE BATTERIES DO NOT CHARGE OR DONOT HOLD A CHARGE☹ At the end of the charging process, the batteryis not correctly charged (see the battery manufacturer’sinstruction-maintenance manual)☺ Check the battery charger error message andcheck the data indicated on the display (see thebattery charger’s instruction manual).☹ The batteries are new and do not generate100% of the rated performances.☺ The accumulator reaches the maximum performanceafter 20-30 complete charge cycles.☹ The electrolyte has evaporated and does notcompletely cover the plates.☺ Check the battery manufacturer’s use and maintenancemanual.42

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!