SPRINT 05 - Faac

Pagina 12SPRINT 05Guide for the installerENGLISH12. FUNCTION LOGICSAutomatic logicGate statusClosedPulsesOpen A Open B Stop Safety devices only at closureOpens gate and reclosesit after pause timeOpens for 8 seconds andcloses after pause timeIf active, it disables theOPEN commandsIf active, it disables theOPEN commandsOpening and closing safetydevicesIf active, it disables theOPEN commandsOpen in pause Closes the gate immediately Closes immediately Stops operation (2) Recharges pause time (3) Recharges pause time (3)At closureAt openingBlocks gate movementNo effect Stops operation(2) Reverses gate movement(1)or reverses it (2) Blocks gate movementReverses gate movement Stops operation(2) No effect(1)or reverses it (2) Stops operation and reversesmotion after releaseStops operation and restartsafter releaseManual logicGate statusPulsesOpen A Open B Stop Safety devices only at closureClosed Opens the gate Opens the gate for 8 secondsOpen in pause Closes the gate Closes the gateAt closureAt openingIf active, it disables theOPEN commandsIf active, it disables theOPEN commandsIf active, it disables theOPEN commandsIf active, it disables theOPEN commandsBlocks gate movementNo effect Stops operation Reverses gate movementor reverses it (1)Blocks gate movementReverses gate movement Stops operation No effector reverses it (1)Opening and closing safetydevicesIf active, it disables theOPEN commandsIf active, it disables theOPEN commandsStops operation and reversesmotion after releaseStops gate operation andrestarts after release(1) The behaviour of Open A push-button is defined by Dip-switch 4 - see parag.7.(2) The Stop impulse blocks gate operation and disables all selected automatic functions. An Open A impulse is necessary to resume the saved cycle.(3) If the safety device is engaged when the programmed pause time elapses, when it is released, the control unit resumes counting the programmed pause time.