Samsung DIGIMAX S800 (EC-S800ZBBA/E1 ) - Manuel de l'utilisateur 8.43 MB, pdf, Anglais

Flash ( ) / Left button
When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
[Selecting the Auto flash]
Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
Flash range (Unit : m)
Normal Macro Auto macro
ISO
WIDE TELE WIDE TELE WIDE TELE
AUTO 0.8 ~ 3.0 0.8 ~ 2.5 0.2 ~ 0.8 0.4 ~ 0.8 0.2 ~ 3.0 0.4 ~ 2.5
INFORMATION
If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the charging time for the flash is
normally within 6 seconds. If the battery is weak, the charging time will be
longer.
During the continuous shot, AEB and movie clip mode, the flash function will
not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or highly
reflective.
When taking an image in a poorly lit condtion with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the floating matters. It is not camera malfuction.
22