Toyota DAB Tuner - PZ473-J0210-00 - DAB Tuner - mode d'emploi

How to switch between Components:
If a Service Station contains several
Components, the DAB tuner regards
Components as if they are individual Service
Stations. When you rotate the [TUNE] knob,
you will automatically scroll through the
Components of each Service. The Components
name will then be displayed instead of the
Service name.
Automatic Tuning
Mode
DAB Service List
The DAB add on unit has a database of all the
Service Stations in the Ensembles, that were
found within an update of the Service List or
were selected in manual mode beforehand.
Within automatic mode it is possible to directly
select the available Services contained in the
Service List without previous tuning to a DAB
Channel. The Service List is sorted in
alphabetical order of Service label (AF on) or in
DAB Channel order (AF off).
How to update the Service List:
Select automatic tuning mode by pressing the
[TUNE MODE] key or [AST] button for less
than 1.7 sec.
In addition to the Services found within a
Service List update, the Services of the last
3 received Ensembles are also part of the
Service List.
How to switch between Service Stations:
The Service Stations can be selected by
pressing: [SEEK/TRACK]
[ ]: next Service Station in Service List
[ ]: previous Service Station in Service List
or
by rotating the [TUNE] knob
Clockwise: next Service Station on Service List.
Counter clockwise: previous Service Station on
Service List.
How to switch between Components:
If a Service Station contains several
Components, the DAB tuner regards
Components as if they are individual Service
Stations. When you operate the [TUNE] knob
or button, you will automatically scroll through
the Components of each Service. The
Components name will then be displayed
instead of the Service name.
NOTE:
Scrambled Audio Services (e.g. Pay-content) is
not supported by this unit. Label information
will be displayed, but without audio.
If the [UPDATE] key is pressed, or if the [AST]
button is pressed for longer than 1.7 sec the
Service List with available Service Stations will
be updated automatically by a complete scan
through all DAB Channels. While scanning is in
process the actual scanned channel is indicated
on the display.
When the [UPDATE] key or [AST] button is
pressed during the update-process, the update
operation is aborted, and the old Service List
content will be restored.
EN
DAB Tuner 9