Funktionskontroll - ppm

More documents

Recommendations

Info

$E:\Publications\User Manuals\PAC\Airtech\621900_03(UK).vp$

Function check Disinfection not achieved or other fault code Installation • Check that the flusher-disinfector is connected to the correct supply voltage and that it is protected by a fuse of the correct rating as per the type plate. • Open the water valves and close the isolator switch. Check that all the lamps on the panel light up and that the buzzer sounds. The display shows the current software version, followed by the preselected program. • If the machine has detergent dosing: Press thes button and check that the lamp in the button lights up. • Check that the temperature of the incoming water is correct. The temperature must be in the range 45-60 °C for hot water and not less than 2 °C for cold water. • Start a program with the machine empty and check that: - the yellow lamp flashes for 6 seconds. - the yellow lamp at M lights up - the temperature rises continuously until the cooling phase begins - the heating-up time does not exceed about 10 minutes - the temperature reaches 89 °C - the green lamp at N lights up and the display shows U7 (hot goods). - open the door and check max temperature. Rim flushing Process running Process complete READY CHOOSE PROGRAM Sensor for automatic door (option) • The machine has a system for descaler and possibly for detergent (option). The service instructions explain how to check and adjust the consumption of descaler. NOTE: Make sure that the suction hose is full of descaler/detergent. The dosing pumps can be operated separately in the service program to fill the hoses with descaler/detergent. Start a normal program and check that the disinfect consumes the correct amount. For descaler, the amount per program is usually about 1.5 - 4.0 ml (follow the supplier's recommendations). • If the machine has a rim flushing program: Press the v button and check that the rim flushing program runs. • If the machine has automatic door: Check that thedoor open and close by using the sensor. • Check that there are no water leaks. If necessary, tighten connections and pipe couplings. 6 Edition 050625 5014907-00 Rev A
Accessories Installation Description Article number Waste strainer 4988891-00 Coarse filter 4988890-00 Combination valve (shutoff valve/ check valve/filter) 1 pair 4996319-00 Isolator (safety switch) 4987618-00 Basket for instruments 5001788-00 Holder for instruments 4991116-00 P-trap, free-standing (diam. 110 mm) 4997267-00 S-trap, free-standing (diam. 110 mm) 5014423-00 P-trap, bench model (diam. 110 mm) 4997267-00 S-trap, bench model (diam. 110 mm) 4997269-00 P-trap, free-standing (diam. 90 mm) 4998720-00 S-trap, free-standing (diam. 90 mm) 5014424-00 P-trap, bench model (diam. 90 mm) 4998720-00 S-trap, bench model (diam. 90mm mm) 5015111-00 Service instructions, GB 5014908-00 Service instructions, FR 5014909-00 Service instructions, SE 5014910-00 Service instructions, DE 5014911-00 5014907-00 Rev A Edition 050625 7
Page 1: Tornado Installation Serial no. SEV
Page 5 and 6: Contents Installation Flusher-disin
Page 7 and 8: Installation Installing the flusher
Page 9: Free-standing model F. External ste
Page 14 and 15: G184 Installation Sicherheitsvorsch
Page 16 and 17: Installation 6. Die Elektroinstalla
Page 18 and 19: Funktionskontrolle Sensor für auto
Page 21 and 22: Installation Appareil de rinçage e
Page 23 and 24: Installation Installation de l'appa
Page 25 and 26: Modèle autonome Modèle encastrabl
Page 27: Accessoires Installation Descriptio
Page 30 and 31: G184 Installation Säkerhetsföresk
Page 32 and 33: Installation 6. Utför den elektris
Page 34 and 35: Funktionskontroll Installation •
Page 36: AUSTRIA ARJO GmbH Föhrenweg 5 AT-6

Funktionskontroll - ppm

Create successful ePaper yourself

Delete template?

Save as template?