D Espressoautomat ES 80 / ES 81 EN Espresso Machine ES ... - Graef

Espresso Machine ES 80 / ES 81
hold down the "COFFEE" button
for 3 seconds. A single long beep
will sound to indicate your settings
have been saved.
important!
The unit will then automatically
power on and begin
heating up.
The unit will stay in programming
mode for up to
30 seconds. If you do not select
a new temperature setting
within 30 seconds the
programm will automatically
return to the Factory Setting
and the unit will the power
on and begin heating up.
Steam Thermoblock Temperature
The steam temperature of this
unit has been calibrated to deliver
a powerful and dry steam for
texturing milk. The temperature
of the steam can be modified in
increments of 3°C up and down
should it be desired.
To do this you need to follow the
instructions below:
Press the "STEAM" button for 3
seconds.
While still holding down the
"STEAM"button briefly press the
"POWER" button and release.
Release "STEAM"button.
This activates the programmability
of the Steam Temperature
and to signal this, the unit will
© Gebr. Graef GmbH & Co. KG - 03
output the current setting with a
sequence fo beeps.
Beep Sequenze Setting
3 short Beeps + 3
2 short Beeps + 2
1 short Beep + 1
1 short und 1
long Beep
Factory Setting
1 long Beep - 1
2 long Beeps - 2
3 long Beeps - 3
important!
The lights behind the "COF-
FEE" and "HOT WATER"
buttons will start flashing.
Within 30 seconds press and release
one of the flashing buttons
depending on the required temperature
adjustment.
Up (+) a setting : Press "HOT WA-
TER"
Down (-) a setting : Press "COFFEE"
important!
When you have selected a
new temperature setting the
unit will sound a sequence
of beeps to indicate the new
temperature setting.
To save your settings press and
hold down the "STEAM" button
for 3 seconds. A single long beep
will sound to indicate your settings
have been saved.
43
EN