Manuel Utilisateur - Cuisimat
Manuel Utilisateur - Cuisimat
Manuel Utilisateur - Cuisimat
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ITALIANO ENGLISH<br />
CHAP. 8. OPTIONAL<br />
TOMATO MASHER OPTIONAL<br />
The tomato masher is an optional accessory for the set machines 12 and 22. It is able to squeeze tomatoes, fruit (without<br />
stone) and vegetable (cooked).<br />
The food product load in the hopper happens manually; always manually and with the pestle help the food product is<br />
introduced in the grinding neck towards the Archimedean screw.<br />
The tomato masher application assembly on the machine is made in the following phases (in exemplification way it is<br />
reported the machine with the basic body)<br />
1. assemble the pipe union 2 and<br />
tighten it with the proper<br />
accessories block knob 1<br />
2. Insert the Archimedean screw<br />
3 inside the pipe union 2<br />
3. Insert the filter 4<br />
4. Block the filter with the wheel<br />
5<br />
5. Insert and position the drain 6<br />
6. Arrange the salvage dump<br />
containers for the puree and<br />
for the reject<br />
7. For the functioning refer to the<br />
mincer instruction<br />
MOZZARELLA CHEESE CUTTER OPTIONAL<br />
The mozzarella cheese cutter is an optional accessory for the set machine 12 and 22. It is able to cut cheese, mozzarella,<br />
mushrooms and carrots using the respective accessories:<br />
cone n. 1 for mozzarella<br />
holes mm 7<br />
03-2008-TRITACARNE-GRAT-STAMPA.doc<br />
cone n. 2 for vegetables in general<br />
holes mm 4<br />
cone n. 3 to grate<br />
holes mm 2,5<br />
cone n .4 to slice<br />
cutting thickness mm 2<br />
The food product load in the hopper happens manually; always manually and with the pestle help the food product is<br />
introduced in the grinding neck towards the Archimedean screw.<br />
The mozzarella cheese cutter application assembly on the machine is made in the following phases (in exemplification way<br />
it is reported the machine with the basic body)<br />
1. Assemble the apposite<br />
cones case accessory 2<br />
and tighten it with the<br />
block accessories knob<br />
1<br />
2. Insert the proper hopper<br />
5 supplied with the<br />
mozzarella cheese<br />
cutter<br />
3. Insert the desired cone 3<br />
tighten it with the die 4<br />
through the key 6<br />
supplied in equipment<br />
4. Arrange the salvage<br />
dump container<br />
5. For the functioning<br />
refer to the mincer<br />
instructions.<br />
Pag. di<br />
17 17