Instructions - Danfoss.com
Instructions - Danfoss.com
Instructions - Danfoss.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Please note<br />
This product should only be installed by a<br />
suitably qualified electrician or heating installer.<br />
The installation must <strong>com</strong>ply with local Building<br />
Regulations and wiring Regulations, including any<br />
<strong>com</strong>petent person requirements that may exist<br />
Specification<br />
Installation<br />
<strong>Instructions</strong><br />
GB<br />
GB - Installation <strong>Instructions</strong><br />
Thermostat features<br />
Temperature range, heating<br />
Water changeover temp<br />
- Cool to Heat<br />
- Heat to Cool<br />
Thermostat off/auto & fan on<br />
selector<br />
Power supply<br />
Relay outputs, heat/cool & fan<br />
Dimensions (mm)<br />
Design standard<br />
Rated impulse voltage<br />
5-30°C<br />
> 30°C<br />
< 16°C<br />
<br />
230 Vac ± 15%, 50/60Hz<br />
2 x SPST, 3(1)A, 10-230 Vac,<br />
Type 1B<br />
110 wide x 90 high x 40 high<br />
EN60730-2-9<br />
2.5Kv<br />
Ball hardness test 75°C<br />
Control pollution situation Degree 2<br />
Temperature accuracy<br />
±1°C<br />
3
Change language