Instructions - Danfoss.com
Instructions - Danfoss.com
Instructions - Danfoss.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fix at a height of approximately 1.5m from the fl oor,<br />
away from draughts or heat sources such a fan-coil<br />
outlets, sunlight or offi ce equipment.<br />
Pipe sensor location<br />
<br />
Fix the pipe sensor to the fl ow pipe using the clamping<br />
band supplied.<br />
!<br />
BYPASS<br />
PS1<br />
GB - Installation <strong>Instructions</strong><br />
PS1%<br />
!<br />
Important note: It is essential that the circuit in which<br />
the pipe sensor is located is not closed off and that<br />
water circulates past the sensor at all times when the<br />
system is in operation. This may require the fi tting of a<br />
bypass valve between system fl ow and return to ensure<br />
circulation past the sensor.<br />
5
Change language