58-GIZLT-3, 58-GIZLT-3E - Tools.by

OBJ_BUCH-933-002.book Page 21 Tuesday, February 24, 2009 3:00 PM
Laser Receiver
LLD20
Working range 1)
0–30 m
Measuring accuracy
– “Medium adjustment”
±1.3 mm
– “Coarse adjustment”
±2.5 mm
Battery
1x9V
Weight according to
EPTA-Procedure 01/2003
0,3 kg
Dimensions
169 x 76 x 25 mm
Degree of protection
IP 55 (protected against debris,
dust and splash water)
1) Depends on the working range of the line laser being used
Assembly
Inserting/Replacing the Battery
Cross-line Laser
Alkali-manganese batteries are recommended for the measuring tool.
– Open the battery compartment of the measuring tool.
– When inserting the battery, pay attention to the correct polarity
according to the representation on the inside of the battery compartment.
– Always replace all batteries at the same time. Only use batteries from
one brand and with the identical capacity.
Remove the batteries from the measuring tool when not
using it for extended periods. When storing for extended periods,
the batteries can corrode and discharge themselves.
Laser Receiver
Using alkali-manganese batteries is recommended for operation of the
laser detector.
– Open the battery compartment 15 on the backside of the laser
detector.
– When inserting the battery, pay attention to the correct polarity
according to the representation on the inside of the battery compartment.
1 609 929 T55 • 24.2.09
English | 21