Manual de Instalación y Mantenimiento - Ferromar

5. EXPLANATIONS OF FUNCTIONS OF POWERSUPPLYThe «Natural Chlor» chlorinator is fitted with sophisticated electronicdiagnostic system to maximize the life of the electrolytic cell. This systemincorporates an easily - understood LED display panel, indicating the action to betaken at all times.A summary of the action to be taken whenever any of the lights on thecasing control panel are on is given below.1) Single press of the button decreases chlorine (Cl 2 ) production by10%. In order to turn OFF the chlorinator it is necessary to press thebutton several times to make sure all Chlorine Production Indicatorsare OFF.Note:The chlorinator produces always to 100% When you press thebuttom what you do is decrease the time of chlorine production no thequantity of chlorine.2) Low Salt (Nacl) Warning indicator. Salt concentration should beincreased to 5000 - 6000 ppm to satisfy chlorine production. If thelight flashes, the level of salt is below the minimum, the chlorinator willturn off slowly automatically.3) Chlorine Production Indicators. There are 10 indicators. Eachindicator corresponds to 10% of Cl 2 production.4) High Salt (Nacl) Warning indicator. When the salt level is high thislight will go on- add fresh water. If light is flashing the chlorinator willshortly turn off automatically as salt levels exceed maximum. Saltconcentration must be decreased to 5000 - 6000 ppm.24