sfogliabile ET30 sett_ott 2016
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
0034-0037 3<br />
ATTREZZATURE<br />
Le lame a disco ScarfMaster ® si identificano<br />
per la particolare geometria del dente.<br />
ScarfMaster ® saw blades are characterized by<br />
a particular tooth geometry.<br />
line, the significant reduction in downtime<br />
and a longer blade life. It is possible to<br />
cut heavy ID-scarf, as well as API pipes<br />
(up to 110 KSI).<br />
Various tooth geometries are available.<br />
ScarfMaster ® saw blades are available in<br />
diameters from 450 up to 600 mm for use<br />
on MTM, Fives OTO, Nakata and Olimpia<br />
cutting machines.<br />
La gamma di prod<strong>ott</strong>i Kinkelder è distribuita nel nostro Paese da Techno Srl.<br />
In Italy, the Kinkelder product range is distributed by Techno Srl.<br />
A blade line also for<br />
cutting no ID-scarf<br />
The TCT saw blades for flying cut-off applications<br />
by Kinkelder include a specific<br />
series - SpeedMaster ® - for single<br />
and twin cut-off of no ID-scarf. When<br />
HSS coated saw blades can no longer be<br />
used, as they do not reach the desired<br />
speed, SpeedMaster ® saw blades provide<br />
an effective solution. The high speed<br />
of the cutting line is ensured by very short<br />
cutting times. The cutting surface is extremely<br />
smooth and burr free.<br />
SpeedMaster ® are especially indicated<br />
when using cut-off machines for single or<br />
twin cutting of small or no ID-scarf, or when<br />
cutting tubes with a tensile strength up to<br />
1,800 N/mm 2 . •<br />
36 - SETTEMBRE OTTOBRE <strong>2016</strong> N.30<br />
PubliTec