14.11.2014 Views

MULTI-TECH II - Britax Römer

MULTI-TECH II - Britax Römer

MULTI-TECH II - Britax Römer

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

15-25kg<br />

6i<br />

Installation of the child seat<br />

IMPORTANT – The child seat MUST always be used with a lap belt and<br />

diagonal belt (approved according to UN/ECE Directive No. 16 or relevant<br />

standards).<br />

IMPORTANT – Do not use any carrying points other than those described in<br />

these operating instructions and those labelled in the child restraint equipment.<br />

Place the child seat facing forward in your car.<br />

Guide the diagonal part of the seatbelt through the dark red, top belt guide to<br />

the OTHER side of the belt buckle (Fig. 6i).<br />

6j<br />

Pull the seatbelt horizontally over the child and fasten it (Fig. 6j). The lap<br />

section should be on the red lap belt guides on both sides of the child seat.<br />

Ensure that the harness is not twisted or loose.<br />

IMPORTANT – The lap belt should be positioned as far forward and as low as<br />

possible over the child's pelvis.<br />

6k<br />

IMPORTANT – Check the position of the seat belt buckle and ensure that it is<br />

not pulled around the child seat on the red lap belt guide (Fig. 6k).<br />

6l<br />

Check the position of the top seatbelt anchoring point in your vehicle (Fig. 6l).<br />

If this anchoring point is in front of the child seat, it should not be used. Try a<br />

different position in the vehicle.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!