Bruksanvisning fÃƒÂ¶r vinkelslip 230 mm Bruksanvisning for ... - Jula

More documents

Recommendations

Info

POLSKI Z zastrzeżeniem prawa do błędów w druku i zmian konstrukcyjnych, które są od nas niezależne. W razie ewentualnych problemów skontaktuj się telefonicznie z naszym działem obsługi klienta pod numerem: 801 600 500. Jula Poland Sp. z o.o., ul. Malborska 49, 03-286 Warszawa, Poland www.jula.pl 22
ENGLISH ENGLISH SAFETY INSTRUCTIONS Read the Operating Instructions carefully before use! Always take basic safety precautions (including the following) when using power tools to safeguard against the risk of fire, electric shock and personal injury. It is important to read the operating instructions for the power tool to understand how it may be used, its limitations and possible risks. Read these instructions carefully before use. They are intended for your safety and the safety of others and to promote a long service life and problem-free operation of the tool. It is important to read the operating instructions and any stickers on the power tool to understand how it may be used, its limitations and possible risks. Cluttered workbenches increase the risk of accidents and injuries. Keep workbenches clean and tidy. Keep the floor clean and uncluttered. Take particular care when the floor is slippery due to sawdust or oil. Do not use power tools in damp or wet areas. Do not expose power tools to rain. Make sure the work area is well lit. Do not use power tools in explosive environments, such as in the vicinity of flammable liquids, gases or dust. For safety reasons, you should have a fire extinguisher and know how to use it. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cookers and refrigerators. Children and pets should be kept away from the work area. Do not allow children to touch or use power tools or extension cords. Keep power tools out of the reach of children when not in use. The tool does the job better and safer when used at the rate for which it was designed. Always use the correct tool for the job. Use the tool only for its intended purpose. Do not try to use small tools for work that requires heavy-duty tools. Use tools only for their intended purpose (e.g. do not use a circular saw to cut tree branches). Loose-fitting clothing and jewellery can get caught in moving parts. Wear a hair net if you have long hair. Always wear eye protection. Normal glasses do not provide sufficient protection for your eyes. Use ear protection during extended work sessions. Wear non-slip safety shoes if there is a risk of heavy objects falling onto your feet or a risk of slipping on wet or slippery floors. Wear a helmet if there is a risk of objects falling onto your head or of knocking your head. Wear a dust filter mask when carrying out dusty work. Resin from concrete or fibre panels can pose a health hazard. Wear an approved face mask with a replaceable filter. If dust extraction and dust collection equipment is provided, this should be connected and used correctly. Never pull or jerk the cord to remove the plug from the mains socket. Never carry the tool by the cord. Keep the cord away from heat, oil, solvents and sharp edges. A damaged cord must be replaced by an authorised service centre. Secure the workpiece with clamps or a vice if possible. This is safer than using your hands and means you have both hands free to operate the tool. Do not overreach – always maintain a firm footing and good balance. Keep tools sharp and clean for better and safer work. Check the cord regularly. A damaged cord must be replaced by an authorised service centre. Extension cords must be checked regularly and replaced if damaged. Keep the handles clean, dry and free from oil and grease. Keep the ventilation openings clean and free from dust. Blocked ventilation openings can cause overheating and damage the motor. Unplug from the mains supply when the power tool is not in use, before carrying out service work, lubrication or adjustments, or before changing accessories, such as blades, bits or discs. Remove adjuster keys/spanners and other assembling tools before starting the power tool. Make sure the power switch is in the OFF position before plugging in to the mains supply. Do not use an extension cord without an earth conductor to power tools with an earth connection. Always used an earthed extension cord or cable-winder. If using the tool outdoors, only use an extension cord approved for outdoor use. The minimum cross-section area for extension cords of up to 15 metres is 1.5 mm². The minimum cross-section area for extension cords of between 15 and 40 metres is 2.5 mm². Always replace damaged extension cords. 23
Page 1 and 2: Bruksanvisning för vinkelslip 230
Page 3 and 4: SVENSKA SVENSKA SÄKERHETSANVISNING
Page 5 and 6: SVENSKA För att förhindra olycko
Page 7 and 8: SVENSKA 7
Page 9 and 10: NORSK NORSK Les bruksanvisningen n
Page 11 and 12: NORSK Følg disse instruksene for d
Page 13 and 14: NORSK 13
Page 15 and 16: NORSK Med forbehold om trykkfeil og
Page 17 and 18: POLSKI Przed włączeniem urządze
Page 19 and 20: POLSKI OPIS 1. Silnik 2. Blokada wr
Page 21: Części (rys. 1 i 2) POLSKI OBSŁU
Page 25 and 26: ENGLISH The angle grinder is fitte
Page 27 and 28: ENGLISH 27
Page 29: ENGLISH Subject to printing errors

Bruksanvisning fÃƒÂ¶r vinkelslip 230 mm Bruksanvisning for ... - Jula

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?