SinePower MSI912, MSI924, MSI1312, MSI1324, MSI1812 ... - Waeco

Connecting the inverterSinePower8.3 Mounting the inverter➤ Hold the inverter against the installation location and mark the fasteningpoints (fig. 4 A, page 4).➤ Attach the inverter using your chosen fastening method (fig. 4 B,page 4).9 Connecting the inverter9.1 General instructions!WARNING!• The inverter may only be connected by a qualified workshop.The following information is intended for technicians who arefamiliar with the guidelines and safety precautions to be applied.• Never use the inverter on vehicles where the positive terminalof the battery is connected to the chassis.• If you do not fit a fuse to the positive cable, the cables canoverload, which might result in a fire.• Reversed polarity can damage the inverter.• MSI900, MSI1300, MSI1800 only: The inverter should not beused to connect to a ring main, it must only be used to powerindividual appliances that are plugged into the inverter outleteither directly or using a purpose-made, moulded extensionlead• When installed in vehicles or boats, the inverter must be connected to thechassis or earth.• When setting up a socket distribution circuit (mains setup), comply withthe applicable regulations.• Only use copper cables.• Keep the cables as short as possible (< 1.8 m).46EN