Ma{instvo 2(3), 63 - 78, (1999) N.Sto{i},...: SAVREMENI RAZVOJ KONSTRUKCIJE... Slika 3. Konstrukcija vij~anog <strong>kompresora</strong> sa reduktorom Figure 3. A screw compressor with a gearbox design Slika 4. Sastavni dijelovi modernog uljnopodmazivanog vij~anog <strong>kompresora</strong> Figure 4. A modern oil floded screw compressor parts LITERATURA - REFERENCES [1] Amosov P.E et al, 1977: Vintovie kompresornie mashinii - Spravochnik (Screw Compression Machines - Handbook), Mashinstroienie, Leningrad [2] Andreev P.A, 1961: Vintovie kompressornie mashinii (Screw Compression Machines), SUDPROM Leninngrad [3] Arbon I.M, 1994: The Design and Application of Rotary Twin-shaft Compressors in the Oil and Gas Process Industry, MEP London [4] Astberg A, 1982: Patent GB 2092676B [5] Bammert K, 1979: Patent Application FRG 2911415 [6] Bowman J.L, 1983: US Patent 4,412,796 [7] Buckingham E, 1963: Analytical Mechanics of Gears, Dover Publ, N.York [8] Chia-Hsing C, 1995: US Patent 5,454,701 - 76 -
Ma{instvo 2(3), 63 - 78, (1999) N.Sto{i},..: SAVREMENI RAZVOJ KONSTRUKCIJE... [9] Edstrom S.E, 1974: US Patent 3,787,154 [10] Edstrom S.E, 1989: Quality Classes for screw Compressor Rotors, Proc IMechE Conference Development in Industrial Compressors, 83 [11] Edstrom S.E, 1992: A Modern Way to Good Screw Compressors, International Compressor Engineering Conference At Purdue, 18 [12] Fleming J.S, Tang Y, 1994: The Analysis of Leakage in a Twin Screw Compressor and its Application to Performance Improvement, Proc IMechE, Journal of Process Mechanical Engineering, Vol 209, 125 [13] Fleming J.S, Tang Y, Cook G, 1998: The Twin Helical Screw Compressor, Part 1: Development, Applications and Competetive Position, P. 2:A Mathematical Model of the Working process, Proc IMechE, Journal of Mechanical Engineering Science, Vol 212, p369 [14] Fujiwara M, Osada Y, 1995: Performance Analysis of Oil Injected Screw Compressors and their Application, Int J Refrig Vol 18, 4 [15] Golovintsov A. G et al, 1964: Rotatsionii kompresorii (Rotary Compressors), Mashinostroenie, Moscow [16] Hanjali} K, Sto{i} N, 1994: Application of mathematical modeling of screw engines to the optimization of lobe profiles, Proc. VDI Tagung "Schraubenmaschinen 94" Dortmund VDI Berichte 1135 [17] Hanjali} K, Sto{i} N, 1997: Development and Optimization of Screw Machines with a Simulation Model, Part II: Thermodynamic Performance Simulation and Design, ASME Transactions, Journal of Fluids Engineering, Vol 119, p 664 [18] Holmes C.S, 1994: Towards a Core program for the Measurement of Screw Rotor Bodies by Co-ordinate Measuring Machine, Proc. VDI Tagung "Schraubenmaschinen 94", Dortmund VDI Berichte 1135 [19] Hough D, Morris S.J, 1984: Patent Application GB 8413619 [20] Kasuya K. et al, 1983: US Patent 4,406,602 [21] Kauder K, Harling H.B, 1994: Visualisierung der Olverteilung in Schraubenkompressoren (Visualisation of Oil Effects in Screw Compressors), Proc. VDI Tagung "Schraubenmaschinen 94", Dortmund VDI Berichte 1135 [22] Kauder K, Helpertz M, 1998: Einlauf- und Hybridschichten für Schraubenkompressoren (Run-in and Hybrid Coatings for Twin-Screw Compressors), Proc. VDI Tagung "Schraubenmaschinen 98", Dortmund VDI Berichte 1391 [23] Konka K-H, 1988: Schraubenkompressoren (Screw Compressors) VDI-Verlag, Duesseldorf [24] Lee H-T, 1988: US Patent 4,890,992 [25] Litvin F.L, 1956: Teoria zubchatiih zaceplenii (Theory of Gearing), Nauka Moscow, second edition 1968, also Gear Geometry and Applied Theory Prentice-Hill, Englewood Cliffs, NJ 1994 [26] Lysholm A, 1942: A New Rotary Compressor, Proc. I.Mech.E. 150,11 [27] Lysholm A, 1966: The Fundamentals of a New Screw Engine, ASME Paper No 66-GT-86 [28] Lysholm A, 1967: US Patent 3,314,598 [29] Margolis D.L, 1978: Analytical Modelling of Helical Screw Turbines for Performance Prediction, J.Engr.for Power 100(3)482 [30] Menssen E, 1977: US Patent 4,028,026 [31] Meyers K, 1997: Creating the Right Environment for Compressor Bearings, Evolution, SKF Ind.Journal, Vol 4, 21 [32] O'Neill P.A, 1993: Industrial Compressors, Theory and Equipment, Butterworth-Heinemann, Oxford [33] Nilson, 1952: US Patent 2,622,787 [34]Peng N, Xing Z, 1990: New Rotor Profile and its Performance Prediction of Screw Compressor, International Compressor Engineering Conference At Purdue, 18 [35] Rinder L, 1979: Schraubenverdichter (Screw Compressors), Springer Verlag, New York [36] Rinder L, 1984: Schraubenverdichterl?ufer mit Evolventenflanken (Screw Compressor Rotor with Involute Lobes), Proc. VDI Tagung "Schraubenmaschinen 84" VDI Berichte Nr. 521 - 77 -
- Page 1 and 2: Ma{instvo 2(3), 63 - 78, (1999) N.S
- Page 3 and 4: Ma{instvo 2(3), 63 - 78, (1999) N.S
- Page 5 and 6: Ma{instvo 2(3), 63 - 78, (1999) N.S
- Page 7 and 8: Ma{instvo 2(3), 63 - 78, (1999) N.S
- Page 9 and 10: Ma{instvo 2(3), 63 - 78, (1999) N.S
- Page 11 and 12: Ma{instvo 2(3), 63 - 78, (1999) N.S
- Page 13: Ma{instvo 2(3), 63 - 78, (1999) N.S