savremeni razvoj konstrukcije i proizvodnje vij^anih kompresora ...

Ma{instvo 2(3), 63 - 78, (1999)
N.Sto{i},...: SAVREMENI RAZVOJ KONSTRUKCIJE...
[37] Rinder L, 1987: US Patent 4,643,654
[38] Sauls J, 1994: The Influence of Leakage on the
Performance of Refrigerant Screw Compressors,
Proc. VDI Tagung "Schraubenmaschinen 94",
Dortmund VDI Berichte 1135
[39] Sauls J, 1998: An Analytical Study of the Effects
of Manufacturing on Screw Rotor Profiles and Rotor
Pair Clearances, Proc. VDI Tagung
"Schraubenmaschinen 98", Dortmund VDI Berichte
1391
[40] Sakun I.A, 1960: Vintovie kompresorii (Screw
Compressors), Mashinostroenie Leningrad
[41] Shibbie, 1979: US Patent 4,140,445
[42] Singh P.J, Onuschak A.D, 1984: A
Comprehensive Computerized Method For Twin
Screw Rotor Profile Generation and Analysis, Purdue
Compressor Technology Conference 544
[43] Singh P.J, Schwartz J.R, 1990: Exact Analytical
Representation of Screw Compressor Rotor
Geometry, International Compressor Engineering
Conference At Purdue, 925
[44] Smith I. K, Sto{i} N, Aldis C. A, 1996:
Development of the trilateral flash cycle system, Part
3: The design of high efficiency two-phase screw
expanders, Proc IMechE, Journal of Power and
Energy, Vol 210, p 75
[45] Sto{i} N, Hanjali} K, 1977: Contribution towards
Modelling of Two-Stage Reciprocating Compressors,
Int.J.Mech.Sci. 19, 439
[46] Sto{i} N, Hanjali} K, Koprivica J, Lovren N,
Ivanovi} M, 1986: CAD of Screw Compressor
Elements, Strojarstvo Journal Zagreb 28, 181
[47] Sto{i} N, Kova~evi} A, Hanjali} K, Milutinovi}
Lj, 1988: Mathematical Modelling of the Oil
Influence upon the Working Cycle of Screw
Compressors, International Compressor Engineering
Conference at Purdue, 355
[48] Sto{i} N, Milutinovi} Lj., Hanjali} K, Kova~evi}
A, 1992: Investigation of the Influence of Oil
Injection upon the Screw Compressor Working
Process, Int.J.Refrig. 15,4,206
[49] Sto{i} N, Hanjali} K, 1994: Development and
optimization of screw engine rotor pairs on the basis
of computer modeling, Proc. XVII Conference on
Compressor Engineering at Purdue, 55
[50] Sto{i} N, 1996: Patent Application GB
9610289.2
[51] Sto{i} N, Hanjali} K, 1997: Development and
Optimization of Screw Machines with a Simulation
Model, Part I: Profile Generation, ASME Transactions,
Journal of Fluids Engineering, Vol 119, p 659
[52] Sto{i} N, Smith I K, Kova~evi} A, Aldis C A,
1997: The Design of a Twin-screw Compressor
Based on a New Profile, Journal of Engineering
Design, Vol 8, 389
[53] Sto{i} N, Kova~evi} A. and Smith I.K, 1998:
Modelling of Screw Compressor Capacity Control,
Proc. XIV Conference on Compressor Engineering at
Purdue, 607
[54] Sto{i} N, Smith I.K, Brasz J.J, Sishtla V, 1998:
The Performance of a Screw Compressor with
Involute Contact Rotors in a Low Viscosity Gas-
Liquid Mixture Environment, Proc. VDI Tagung
"Schraubenmaschinen 98", Dortmund VDI Berichte
1391
[55] Sto{i} N, 1998: On Gearing of Helical Screw
Compressor Rotors, Proc IMechE, Journal of
Mechanical Engineering Science, Vol 212, 587
[56] Tang Y, Fleming J.S, 1992: Obtaining the
Optimum Geometrical Parameters of a Refrigeration
Helical Screw Compressor, International Compressor
Engineering Conference at Purdue 213
[57] Tang Y, Fleming J.S, 1994: Clearances between
the Rotors of Helical Screw Compressors: Their
determination, Optimization and Thermodynamic
Consequences, Proc IMechE, J. of Process
Mechanical Engineering, Vol 208, 155
[58] Xion Z. Dagang X, 1986: Study on Actual Profile
Surface and Engaging Clearance of Screw
Compressor Rotors, Purdue Compressor Technology
Conference 239
[59] Zenan X, 1984: The Dynamic Measurement and
Mating Design of a Screw Compressor Rotor Pair,
Purdue Compressor Technology Conference 314
[60] Zhang L, Hamilton J.F, 1992: Main Geometric
Characteristics of the Twin Screw Compressor,
International Compressor Engineering Conference at
Purdue 2136
- 78 -