Log & Guard™

Log & GuardMonitoring, Documentation, Alarming for IVFThe maintenance and control of all culture and storage parameters in IVF and cryopreservation labs are key elements ofquality management systems and various directives. OCTAX Log & Guard is the only monitoring and alarming systemwhich has been specially designed for IVF. It is able to independently monitor temperatures in incubators, fridges and LN 2storage tanks, media pH (via pH Online TM ), CO 2 in incubators as well as mains supply.Measurements are taken through peripheral temperature, pH or CO 2 sensors and saved to an internal flash memoryindependent from any PC. Log & Guard TM raises alarm if any of the values deviates from the pre-defined normal range.Alarming can be done via acoustical / optical signals, by relay output or by sending an SMS to mobile phones. Visualizationand download of logged data as well as easy channel management is done via web interface from any PC in the intranet.SpecificationsPower supply: 110 – 240 V AC via external power adapter; battery backedDimensions: 360 x 300 x 90 mm (WxDxH)Number of temperature sensors to be connected: max. 54Number of pH Online TM sensors to be connected: max. 24Number of CO 2 sensors to be connected: max. 180Measuring intervals: infinitely variableSMS alarming: SIM card requiredAdvantages• Universal device for measurement, documentation, alarming: many tasks – one solution!• Most flexible & extendible• Web interface based software – no PC needed• Easy to useRef. No. 14840/0000OCTAX Log & Guard TMmonitoring & alarming deviceRef. No. 14840/0200Temperature sensor forincubators, fridges, freezers,starter including with levelconverterRef. No. 14840/0201Temperature sensor forincubators, fridges, freezers,additional deviceRef. No. 14840/0210Temperature sensor for LN 2storage tanks, starter includinglevel converterRef. No. 14840/0211Temperature sensor for LN 2storage tanks, additional deviceRef. No. 14840/0300CO 2 sensor for incubators14