DSOF-80000 Series - Sloan Valve Company

PRIOR TO INSTALLATION
Prior to installing the Sloan Designer Series Lavatory System, install the items
listed below. Also, refer to the appropriate rough-in diagram on pages 2 – 6.
• Water Supply
• Hot and cold water supply lines or tempered water supply line
• Drain lines
Important:
• ADEQUATE STRUCTURAL SUPPORT IN OR BEHIND THE WALL IS REQUIRED.
LAVATORY SYSTEM ROUGH-IN SINGLE STATION
DSWD-81000 Designer Series Weir Deck
Single Station Solid Surface Lavatory System
2 ½”
2 ½” (63 mm)
(63 mm) 2 ½” 22”
22” (63 (558 mm) mm)
(558 mm) 22”
(558 mm)
6 ½”
(165 mm) 6 ½”
(165 mm)
6 ½”
(165 mm)
17”
(431 mm)
17”
(431 17” mm) 30”
(431 mm) (762 mm)
30”
(762 30” mm)
(762 mm)
CENTERLINE
CENTERLINE
24”
(609 mm)
5”
1 ¹/8”
5”
1 (127 ¹/8” 5” mm) (127 mm)
(28 1 mm) ¹/8” (28 (127 mm) mm)
(28 mm)
CENTERLINE
DSOF-81000 Designer Series 13” Open Front
(330 mm)
Single Station Solid Surface Lavatory System
22”
(558 mm)
22”
(558 mm)
1 3/4”
(44 mm)
1 3/4”
(44 mm)
24”
(609 mm)
13”
(330 mm)
CENTERLINE
CENTERLINE
1 3/4”
(44 mm)
1 3/4”
(44 mm)
5” (127 mm)
17”
(431 mm)
2 1/2” (63 mm)
2 1/2” (63 mm)
34”
6½” (863 mm)
(165 mm) 34”
6½” (863 34” mm)
(165 6½” mm) (863 mm)
(165 mm)
5” (127 mm)
17”
(431 mm)
2 1/2” (63 mm)
2 1/2” (63 mm)
5” (63 mm)
2
REFER TO THE APPROPRIATE ROUGH-IN DIAGRAM ON PAGES 2 – 6 FOR
DRY WEIGHT OF SINK. STRUCTURAL SUPPORT MUST HAVE A MINIMUM
PULLOUT RATING OF 1000 POUNDS (450 kg).
• ALL PLUMBING SHOULD BE INSTALLED IN ACCORDANCE WITH APPLICABLE
CODES AND REGULATIONS.
• BEFORE CONNECTING FLEX HOSES TO SUPPLY STOPS, FLUSH ALL WATER
LINES UNTIL WATER IS CLEAR.
5” 5”
5” (127 mm)
(127 mm)
(127 mm)
5” (63 mm)
ADA
22”
(558 mm)
22”
(558 22” mm)
(558 mm)
5” 5”
(127 (127 5” mm) mm)
(127 mm)
Water Supply
Water Supply
Water Supply
24”
(610 mm)
24”
ADA AD ADA 20” (610 24” mm)
(508mm) (610 mm)
ADA
ADA 20”
(508mm) 20”
(508mm)
C L
22”
(558 mm)
5”
(127 mm)
4”
(101 mm)
ADA
C L
4” (101 mm)
5”
(127 mm)
4”
(101 mm)
P-Trap Configuration
(In Wall)
4” (101 mm)
P-Trap Configuration
(In Wall)