Metrode Consumables Catalog

CMo
Product description Copper coated solid wire for TIG and MIG.
0.5%Mo solid TIG and MIG wire for creep resisting steels
Specifications AWS A5.28 ER70S-A1 (Previous classification was ER70S-G)
BS EN 12070 Mo Si
BS 2901: Pt1 A30
DIN 8575 SG Mo
ASME IX Qualification QW432 F-No 6, QW442 A-No 2
Composition C Mn Si S P Cr Ni Mo Cu V
(wire wt %) min 0.08 0.90 0.50 -- -- -- -- 0.45 -- --
max 0.12 1.30 0.70 0.020 0.020 0.2 0.20 0.60 0.3 0.03
typ 0.1 1.2 0.6 0.01 0.01 0.03 0.02 0.5 0.05 0.01
All-weld mechanical Properties as-welded (AW) or after PWHT: typical: TIG MAG: Ar + 5% CO2
properties min. * AW 620ºC/1h AW 620ºC/1h
Tensile strength MPa 515 662 640 650 620
0.2% Proof stress MPa 400 540 520 530 505
Elongation on 4d % 19 29 25 29 25
Elongation on 5d % 22 26 24 25 24
Impact energy - 30°C J -- 52 170 42 96
Hardness cap/mid HV -- 210/245 205/230 215/235 200/220
* Minimum values are after PWHT 620ºC/1h (AWS) or 595ºC/0.5h (DIN) and as-welded for BS EN.
MAG welds using more oxidising shielding gas (higher CO 2 + O 2) will have lower strength than shown.
Typical operating TIG MIG
parameters
Shielding Argon
Argon + 2-20%CO2 Argon + 1.5% O2 or proprietary
Current DC- DC+
Diameter 2.4mm 1.2mm
Parameters 100A, 12V 260A, 26V
Packaging data ø mm TIG MIG
1.2 -- 15kg spool
1.6 5kg tube --
2.4 5kg tube --
Fume data MIG fume composition (wt %) (TIG fume negligible)
Fe Mn Cr 3
Ni Mo Cu OES (mg/m 3 )
55 5