© 2009 <strong>Autodesk</strong>, Inc. All Rights Reserved. Except as otherwise permitted by <strong>Autodesk</strong>, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Trademarks The following are registered trademarks or trademarks of <strong>Autodesk</strong>, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, <strong>Autodesk</strong>, <strong>Autodesk</strong> Envision, <strong>Autodesk</strong> Insight, <strong>Autodesk</strong> Intent, <strong>Autodesk</strong> Inventor, <strong>Autodesk</strong> Map, <strong>Autodesk</strong> MapGuide, <strong>Autodesk</strong> Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design|Studio (design/logo), Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Filmbox, Fire, Flame, Flint, FMDesktop, Freewheel, Frost, GDX Driver, Gmax, Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor LT, Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, LocationLogic, Lustre, Matchmover, Maya, Mechanical Desktop, Moonbox, MotionBuilder, Movimento, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, PolarSnap, PortfolioWall, Powered with <strong>Autodesk</strong> Technology, Productstream, ProjectPoint, ProMaterials, RasterDWG, Reactor, RealDWG, Real-time Roto, REALVIZ, Recognize, Render Queue, Retimer,Reveal, <strong>Revit</strong>, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), SteeringWheels, Stitcher, Stone, StudioTools, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual Construction, Visual Drainage, Visual Landscape, Visual Survey, Visual Toolbox, Visual LISP, Voice Reality, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo). The following are registered trademarks or trademarks of <strong>Autodesk</strong> Canada Co. in the USA and/or Canada and other countries: Backburner,Multi-Master Editing, River, and Sparks. The following are registered trademarks or trademarks of MoldflowCorp. in the USA and/or other countries: Moldflow, MPA, MPA (design/logo),Moldflow Plastics Advisers, MPI, MPI (design/logo), Moldflow Plastics Insight,MPX, MPX (design/logo), Moldflow Plastics Xpert. Third Party Software Program Credits ACIS Copyright © 1989-2001 Spatial Corp. Portions Copyright © 2002 <strong>Autodesk</strong>, Inc. Flash ® is a registered trademark of Macromedia, Inc. in the United States and/or other countries. International CorrectSpell Spelling Correction System © 1995 by Lernout & Hauspie Speech Products, N.V. All rights reserved. InstallShield 3.0. Copyright © 1997 InstallShield Software Corporation. All rights reserved. PANTONE ® Colors displayed in the software application or in the user documentation may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE Color Data and/or Software shall not be copied onto another disk or into memory unless as part of the execution of this <strong>Autodesk</strong> software product. Portions Copyright © 1991-1996 Arthur D. Applegate. All rights reserved. Portions of this software are based on the work of the Independent JPEG Group. RAL DESIGN © RAL, Sankt Augustin, 2002 RAL CLASSIC © RAL, Sankt Augustin, 2002 Representation of the RAL Colors is done with the approval of RAL Deutsches Institut für Gütesicherung und Kennzeichnung e.V. (RAL German Institute for Quality Assurance and Certification, re. Assoc.), D-53757 Sankt Augustin. Typefaces from the Bitstream ® typeface library copyright 1992. Typefaces from Payne Loving Trust © 1996. All rights reserved. Printed manual and help produced with Idiom WorldServer . WindowBlinds: DirectSkin OCX © Stardock ® AnswerWorks 4.0 ©; 1997-2003 WexTech Systems, Inc. Portions of this software © Vantage-Knexys. All rights reserved. The Director General of the Geographic Survey Institute has issued the approval for the coordinates exchange numbered TKY2JGD for Japan Geodetic Datum 2000, also known as technical information No H1-N0.2 of the Geographic Survey Institute, to be installed and used within this software product (Approval No.: 646 issued by GSI, April 8, 2002). Portions of this computer program are copyright © 1995-1999 LizardTech, Inc. All rights reserved. MrSID is protected by U.S. Patent No. 5,710,835. Foreign Patents Pending. Portions of this computer program are Copyright ©; 2000 Earth Resource Mapping, Inc. OSTN97 © Crown Copyright 1997. All rights reserved. OSTN02 © Crown copyright 2002. All rights reserved. OSGM02 © Crown copyright 2002, © Ordnance Survey Ireland, 2002. FME Objects Engine © 2005 SAFE Software. All rights reserved. ETABS is a registered trademark of Computers and <strong>Structure</strong>s, Inc. ETABS © copyright 1984-2005 Computers and <strong>Structure</strong>s, Inc. All rights reserved. RISA is a trademark of RISA Technologies. RISA-3D copyright © 1993-2005 RISA Technologies. All rights reserved. Portions relating to JPEG © Copyright 1991-1998 Thomas G. Lane. All rights reserved. This software is based in part on the work of the Independent JPEG Group.
Portions relating to TIFF © Copyright 1997-1998 Sam Leffler. © Copyright 1991-1997 Silicon Graphics, Inc. All rights reserved. The Tiff portions of this software are provided by the copyright holders and contributors “as is” and any express or implied warranties, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose are disclaimed. In no event shall the copyright owner or contributors of the TIFF portions be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of the TIFF portions of this software, even if advised of the possibility of such damage. Portions of Libtiff 3.5.7 Copyright © 1988-1997 Sam Leffler. Copyright © 1991-1997 Silicon Graphics, Inc. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics. Portions of Libxml2 2.6.4 Copyright © 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notices and this permission notice shall be included in all copies or substantial portions of the Software. Government Use Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR 12.212 (Commercial Computer Software-Restricted Rights) and DFAR 227.7202 (Rights in Technical Data and Computer Software), as applicable.
- Seite 1: Revit Structure 2010 Übungslektion
- Seite 6 und 7: Kapitel 6 Einfügen von Wänden . .
- Seite 8 und 9: viii
- Seite 11 und 12: Verwenden der Übungslektionen In d
- Seite 13 und 14: Zugreifen auf Übungsdateien Übung
- Seite 15 und 16: Die Grundlagen In dieser Einheit er
- Seite 17 und 18: Es gibt zwei Typen ansichtsspezifis
- Seite 19 und 20: Die Bestandteile der Benutzeroberfl
- Seite 21 und 22: Registerkarte der Multifunktionslei
- Seite 23 und 24: Menü-Browser Über den Menü-Brows
- Seite 25 und 26: Element im Schnellzugriff-Werkzeugk
- Seite 27 und 28: Steuerelemente für Ansichten Die S
- Seite 29 und 30: Wenn Sie die Maustaste freigeben, w
- Seite 31 und 32: 5 Klicken Sie auf das untere Steuer
- Seite 33 und 34: Der Balken wird nach unten verschob
- Seite 35: Starten eines Projekts In den Einhe
- Seite 38 und 39: Dem Projekt hinzugefügte Stützenr
- Seite 40 und 41: Hinzufügen neuer Ebenen 12 Schlie
- Seite 42 und 43: In der nächsten Übungslektion wir
- Seite 44 und 45: 17 Wählen Sie die vertikale Raster
- Seite 47 und 48: Importieren von RAC-Dateien In dies
- Seite 49 und 50: Verknüpfen einer Revit Architectur
- Seite 51 und 52: Das Dialogfeld Optionen für Kopier
- Seite 53 und 54:
Ein Symbol für Kopieren/Überwache
- Seite 55:
Modellieren eines Projekts In diese
- Seite 58 und 59:
Dem Tragwerk hinzugefügte Stahlst
- Seite 60 und 61:
Die Rasterlinien werden hervorgehob
- Seite 62 und 63:
Anzeigen der Stützen in 3D 17 Dopp
- Seite 64 und 65:
■ Klicken Sie im linken Bereich d
- Seite 66 und 67:
13 Wählen Sie wie folgt mehrere Ra
- Seite 69 und 70:
Einfügen von Wänden In dieser Ein
- Seite 71 und 72:
Die importierte Architekturzeichnun
- Seite 73 und 74:
14 Drücken Sie die Esc-Taste. Plat
- Seite 75 und 76:
Ändern der Abhängigkeit für die
- Seite 77 und 78:
Hinzufügen von Balken In dieser Ei
- Seite 79 und 80:
Übungsdatei ■ Klicken Sie auf
- Seite 81 und 82:
11 Drücken Sie die Esc-Taste. Anze
- Seite 83 und 84:
20 Drücken Sie die Entf-Taste. 21
- Seite 85 und 86:
3 Klicken Sie auf der Registerkarte
- Seite 87 und 88:
12 Klicken Sie in der Gruppe Filter
- Seite 89:
ANMERKUNG Die Modelllinien des Balk
- Seite 92 und 93:
hinzugefügter gekrümmter Balken H
- Seite 94 und 95:
Der Bogen wird an der Außenseite e
- Seite 96 und 97:
15 Schließen Sie die Datei und spe
- Seite 98 und 99:
Der gekrümmte Balken wird eingefü
- Seite 100 und 101:
Annäherungsdarstellung der Kurve f
- Seite 102 und 103:
Stahlbalkensystem Automatisches Pla
- Seite 104 und 105:
Balkensystem, mit Betonrahmen verbu
- Seite 106 und 107:
Skizzieren eines Balkensystems In d
- Seite 108 und 109:
12 Drücken Sie die Esc-Taste. Deak
- Seite 110 und 111:
ANMERKUNG Die Modelllinien des Balk
- Seite 112 und 113:
Angepasster Fachwerkbinder Hinzufü
- Seite 114 und 115:
ANMERKUNG Die standardmäßige Prat
- Seite 116 und 117:
16 Klicken Sie in der Gruppe Elemen
- Seite 118 und 119:
3 Klicken Sie in der Gruppe Element
- Seite 120 und 121:
16 Klicken Sie in der Optionsleiste
- Seite 122 und 123:
25 Drücken Sie zweimal die Esc-Tas
- Seite 124 und 125:
Übungsdatei ■ Klicken Sie auf
- Seite 126 und 127:
118 | Kapitel 11 Hinzufügen von Pl
- Seite 128 und 129:
120 | Kapitel 11 Hinzufügen von Pl
- Seite 130 und 131:
22 Klicken Sie in der Gruppe Gescho
- Seite 132 und 133:
124
- Seite 134 und 135:
Hinzufügen von Schachtöffnungen I
- Seite 136 und 137:
Hinzufügen von symbolischen Linien
- Seite 138 und 139:
17 Klicken Sie auf den Mittelpunkt
- Seite 140 und 141:
■ Klicken Sie im linken Bereich d
- Seite 142 und 143:
Zeichnen der oberen horizontalen St
- Seite 144 und 145:
Hinzufügen eines Plattenfundaments
- Seite 146 und 147:
Damit befinden Sie sich im Skizzier
- Seite 148 und 149:
Erstellen einer neuen Plattengröß
- Seite 150 und 151:
Der Pfahlkopf springt zur Mitte der
- Seite 152 und 153:
Das Fundament wird auf 90 Grad gedr
- Seite 154 und 155:
16 Klicken Sie, um den Pfahlkopf zu
- Seite 156 und 157:
Platzieren von Einzelfundamenten an
- Seite 158 und 159:
150
- Seite 160 und 161:
152
- Seite 162 und 163:
Auflagerbedingungen Prüfen des Ber
- Seite 164 und 165:
Ausführen der Prüfungen für den
- Seite 166 und 167:
In dieser Übung fügen Sie dem Tra
- Seite 168 und 169:
6 Klicken Sie in der Gruppe Auswahl
- Seite 170 und 171:
Lastkombinationen Für die nächste
- Seite 172 und 173:
Hinzufügen einer WIND1-Kombination
- Seite 174 und 175:
Die übertragenen Lastkombinationen
- Seite 176 und 177:
11 Klicken Sie in der Gruppe Auswah
- Seite 178 und 179:
170
- Seite 180 und 181:
172
- Seite 182 und 183:
Verlängern des Tragwerks bis zur D
- Seite 184 und 185:
ANMERKUNG Wählen Sie keine Element
- Seite 186 und 187:
Bearbeiten der Dachplatte ANMERKUNG
- Seite 188 und 189:
180
- Seite 190 und 191:
Bearbeiten einer flachen Platte In
- Seite 192 und 193:
4 Zeichnen Sie wie hier gezeigt ein
- Seite 194 und 195:
13 Zeichnen Sie einen vertikalen Sc
- Seite 196 und 197:
23 Fügen Sie eine Isolierschicht h
- Seite 198 und 199:
190
- Seite 200 und 201:
192
- Seite 202 und 203:
Bewehrung, lotrecht zu einer Arbeit
- Seite 204 und 205:
Öffnen des Biegeformbrowsers In Re
- Seite 206 und 207:
21 Ändern Sie auf dieselbe Weise d
- Seite 208 und 209:
7 Drücken Sie die Esc-Taste. Spieg
- Seite 210 und 211:
20 Klicken Sie, um die Bewehrung zu
- Seite 212 und 213:
5 Klicken Sie im Schnellzugriff-Wer
- Seite 214 und 215:
17 Drücken Sie die Esc-Taste. Wäh
- Seite 216 und 217:
15 Doppelklicken Sie im Projektbrow
- Seite 218 und 219:
Skizzieren der Flächenbewehrung Ä
- Seite 220 und 221:
Ändern der Sichtbarkeit der Schnit
- Seite 222 und 223:
14 Klicken Sie auf der Registerkart
- Seite 224 und 225:
Entfernen der Hauptbewehrung In der
- Seite 226 und 227:
25 Drücken Sie die Esc-Taste. Änd
- Seite 228 und 229:
Ändern des Bewehrungshakenstils Be
- Seite 230 und 231:
9 Drücken Sie die Esc-Taste. Ände
- Seite 232 und 233:
ANMERKUNG Die in Ihrer Datei verwen
- Seite 234 und 235:
226
- Seite 236 und 237:
Skizzieren von Bewehrung in der Pla
- Seite 238 und 239:
6 Klicken Sie in der Gruppe Zeichne
- Seite 240 und 241:
17 Klicken Sie in der Gruppe Bewehr
- Seite 242 und 243:
24 Drücken Sie die Esc-Taste. Plat
- Seite 244 und 245:
32 Drücken Sie zweimal die Esc-Tas
- Seite 246 und 247:
238
- Seite 248 und 249:
Detailausschnittsansicht Plan mit A
- Seite 250 und 251:
Der ausgewählte Plankopf ist eine
- Seite 252 und 253:
Erstellen von Schnitt- und Detailau
- Seite 254 und 255:
5 Drücken Sie die Esc-Taste. Ände
- Seite 256 und 257:
Öffnen der Detailausschnittsansich
- Seite 258 und 259:
Positionieren des Ansichtstitels 8
- Seite 260 und 261:
Ändern des Maßstabs für die Deta
- Seite 262 und 263:
254
- Seite 264 und 265:
Erstellen von Bemaßungen In dieser
- Seite 266 und 267:
Bearbeiten der Position von Bemaßu
- Seite 268 und 269:
17 Drücken Sie die Esc-Taste. Hinz
- Seite 270 und 271:
30 Schließen Sie die Datei, und sp
- Seite 272 und 273:
■ Klicken Sie in der Gruppe Auswa
- Seite 274 und 275:
■ Klicken Sie auf OK. 15 Drücken
- Seite 276 und 277:
Übungsdatei ■ Klicken Sie auf
- Seite 278 und 279:
15 Geben Sie von oben nach unten de
- Seite 280 und 281:
272
- Seite 282 und 283:
■ Erstellen einer benutzerdefinie
- Seite 284 und 285:
3 Gehen Sie im Dialogfeld Balkenbes
- Seite 286 und 287:
■ Wählen Sie im Dialogfeld Besch
- Seite 288 und 289:
16 Wählen Sie die Beschriftung des
- Seite 290 und 291:
■ Klicken Sie im linken Bereich d
- Seite 292 und 293:
18 Drücken Sie die Esc-Taste. Spei
- Seite 294 und 295:
■ Anpassen der Typenliste ■ Ers
- Seite 296 und 297:
Auswahl der in die Balkenliste aufz
- Seite 298 und 299:
Bearbeiten der Familienparameter 29
- Seite 300 und 301:
29 Sortieren Sie unter Vorgesehene
- Seite 302 und 303:
Auswählen eines Filters 6 Klicken
- Seite 304 und 305:
23 Klicken Sie im Dialogfeld Bautei
- Seite 306 und 307:
Anpassen der Typenliste In dieser
- Seite 308 und 309:
17 Klicken Sie im Dialogfeld Bautei
- Seite 310 und 311:
29 Klicken Sie im Dialogfeld Bautei
- Seite 312 und 313:
■ Klicken Sie auf OK. Berechnen d
- Seite 314 und 315:
■ Wählen Sie unter Rundung die O
- Seite 316 und 317:
■ Wählen Sie für den Ebenentext
- Seite 318 und 319:
■ Klicken Sie im linken Bereich d
- Seite 320 und 321:
312 | Kapitel 24 Bauteillisten 21 P
- Seite 322 und 323:
Übungsdatei ■ Klicken Sie auf
- Seite 324 und 325:
7 Gehen Sie im Dialogfeld Speichern
- Seite 326 und 327:
3 Gehen Sie im Dialogfeld Ansichten
- Seite 328 und 329:
320 | Kapitel 25 Detaillierung ■
- Seite 330 und 331:
322 | Kapitel 25 Detaillierung 15 G
- Seite 332 und 333:
Erstellen einer Schnittansicht 1 Do
- Seite 334 und 335:
Dieses Dreieck markiert den Mittelp
- Seite 336 und 337:
31 Drücken Sie die Esc-Taste. Hinz
- Seite 338 und 339:
47 Drücken Sie die Esc-Taste. 48 S
- Seite 340 und 341:
Hinzufügen von Detailelementen zur
- Seite 342 und 343:
19 Drücken Sie zweimal die Esc-Tas
- Seite 344 und 345:
3 Erweitern Sie im Projektbrowser d
- Seite 346 und 347:
20 Ziehen Sie das Bauteil der Decke
- Seite 348:
33 Zeichnen Sie eine Text-Führungs