KESSEL-Schaltgerät Aqatronic® S für KESSEL ...

5.1 Installation of the switch unit
The chapter “Safety instructions” must be heeded!
The switch unit is part of the KESSEL rainwater
pumping system Aqabull or Aqadive and is already
completely installed in the system. If used
separately, the switch unit is installed in a suitable
spot, e.g. at eye level on the wall. Screw
in place (self-cutting screws) later using max. 1
Nm. Attach the switch box to the wall as shown
using the 4 wood screws M3.5x30. The wood
screws, plastic dowels and a drilling template
are included.
Hinge (2x)
Plastic dowel 5 mm (4x)
Slotted head wood screw 3.5x30 (4x)
Cover screws (4x max. 1 Nm)
2
5. Installation
3
30
1
1
4