Lamello Variocut

Weitere Magazine

Empfehlungen

Info

English Safety instructions and liability Please also read the enclosed general safety instructions carefully before putting your grooving machine into service. - When the grooving machine is not in use, before all servicing work, before changing the cutter, etc.: unplug the cable! - Ensure that the machine is switched off before inserting the plug in the socket. - Check plug and cable for damage before inserting. If damage is found, replacement must be made immediately by a technician. - Make sure before starting the grooving machine that the rated voltage on the name-plate corresponds with the mains voltage. The machine is only suitable for AC power supplies. - The grooving machine is double-insulated and (conforming to CEE and VDE regulations) has a two-conductor cable without ground conductor. The machine can be connected without risk to an ungrounded socket. - Do not drill the motor case (e.g. to attach labels) since this damages the double insulation. Use only adhesive labels for labelling. - Clamp work tightly if possible and guide machine with both hands. - Use only perfectly sharpened tools, since otherwise increased cutting forces may shift the work away. - Do not stop the cutter after switching off. - The machine should only be used for the applications described in these operating instructions. - Do not expose to rain or use in damp locations. - Manufacturer and retailer disclaim all product liability if the grooving machine is modified in any way from its original state or condition as delivered, or if the grooving machine is used in a manner inconsistent with operating and safety instructions. EU-Declaration of Conformity We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 55014, EN 60745-1, EN 61000 in accordance with the regulations of directives 73/23EWG, 98/37/EG, 89/336/EWG. Sound emission and vibration acceleration Typically A-weighted noise levels of the tool are: Sound pressure level = 84 dB (A) Sound power level = 95 dB (A) Wear ear protection! Typically the hand-arm vibration is below 5 m/s 2 . Lamello AG Wood Joining technology Hauptstrasse 149 CH-4416 Bubendorf K. Steiner E.Zeller Lamello AG: Domicile Bubendorf, Place of jurisdiction Liestal Liable company: Lamello AG, Domicile Bubendorf, Place of jurisdiction Liestal Owner: Mr. Karl Steiner, CEO: Mr. Erich Zeller 3
High adjustment Variocut Pos. Bezeichnung Art. Nr. 1 Sicherungsring für Bohrungen D 22 351044 2 Rillenkugellager 608 ZZ 313215 3 Stellschraube 341046 4, 6 Senkschraube mit Unterlagscheibe 314045 5 Höhenskala 321057 7 Getriebegehäuse 314425 8, 10 Ritzel mit Stift und Tellerrad spiralverzahnt zu L44 316031 9 Rillenkugellager 6000-2RS 313211 11, 12, 13, 14, 17 Führung komplett 254301 15 Frässpindel 341050 18 Tellerrad spiralverzahnt 316032 19, 20 Tellerfederpaket mit Distanzscheibe 314042 21, 22 Kugel und Federn zu Höhenverstellung 314043 8
Seite 2 und 3: A) 1 2 3 +/- 2 mm, 4 - 8 mm 4 5 B)
Seite 4 und 5: Deutsch Sicherheitshinweise und Haf
Seite 6 und 7: Ersatzteilzeichnung Elektromotor L4
Seite 10 und 11: Höhenverstellung Variocut 7
Seite 12 und 13: Ersatzteilzeichnung Variocut 21 2 2

Lamello Variocut

Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.

Template löschen?

Als Template speichern?