The Alessi-Serie - Solarlink GmbH, preiswert und kompetent
The Alessi-Serie - Solarlink GmbH, preiswert und kompetent
The Alessi-Serie - Solarlink GmbH, preiswert und kompetent
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
<strong>The</strong> <strong>Alessi</strong>-<strong>Serie</strong><br />
Pure Sine Wave Inverters<br />
6. TECHNICAL SPECIFICATIONS / DECLARATION OF CONFORMITY<br />
6.1 <strong>Alessi</strong> 1000i-12, 1400i-24 and 1500i-48<br />
TECHNICAL DATA<br />
<strong>Alessi</strong> 1000i-12 <strong>Alessi</strong> 1400i-24 <strong>Alessi</strong> 1500i-48<br />
Output power 1) : @ Ta=25°C<br />
Pnom 850VA 1000VA 1000VA<br />
P30minutes 1000VA 1400VA 1500VA<br />
Psurge 1800VA 2500VA 3000VA<br />
Short circuit output current ≈ 8A ≈ 10A ≈ 13A<br />
Output voltage 230VAC ± 1% (or 115VAC ± 1%)<br />
Output frequency 50Hz ± 0.05% (or 60Hz ± 0.05%)<br />
Output waveform<br />
True sinewave (THD < 5% @ Pnom)<br />
Admissible cos ϕ of load 0.3 – 1<br />
Input voltage :<br />
Nominal 12VDC 24VDC 48VDC<br />
Range (static) 10.5 – 16VDC 21 – 31VDC 41 – 60VDC<br />
Range @ Pnom 9.7 – 16VDC 19 – 31VDC 40 – 60VDC<br />
Maximum input ripple voltage<br />
≈ 1.3VACrms<br />
Efficiency<br />
Maximum 92% 94% 96%<br />
@ Pnom 83% 87% 91%<br />
No load power consumption at nominal < 7.5W < 8.5W < 10.5W<br />
input voltage<br />
No load power consumption at nominal < 1.5W < 2W < 2.5W<br />
input voltage in Automatic StandBy mode<br />
Automatic StandBy threshold<br />
Pout = 5W<br />
Operating temperature range (ambient) 0 .. 40 °C<br />
Protections against<br />
Short circuit, overload, high temperature, low battery<br />
voltage and high input ripple voltage<br />
Error indications (by preprogrammed<br />
blinking sequences of the red LED)<br />
Short circuit/overload, high temperature, high/low<br />
battery voltage and high input ripple voltage<br />
Remaining indications<br />
Overload (red LED)<br />
AC Present (blue LED)<br />
DC input connection<br />
two wires, length 1.5 meters, area ∅ 25mm²<br />
AC output connection<br />
IEC320 type AC outlet<br />
Enclosure body size (l x h x w)<br />
355 x 105 x 206mm (without mounting brackets)<br />
Protection class<br />
IP20<br />
Inverter weight 10.5 kg 11 kg 11 kg<br />
<strong>The</strong> inverter complies with the following<br />
standards :<br />
EN50081-1 Generic Emissions Standard<br />
EN50082-1 Generic Immunity Standard<br />
EN60335-1 Safety Standard<br />
Note : the given specifications are subject to change without notice<br />
1)<br />
Measured with resistive load<br />
- 15 -