Becker Centronic VarioControl VC470 Anleitung - auf enobi.de
Becker Centronic VarioControl VC470 Anleitung - auf enobi.de
Becker Centronic VarioControl VC470 Anleitung - auf enobi.de
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
a) Deleting transmitters individually<br />
Note<br />
Deleting transmitters<br />
The master transmitter programmed un<strong>de</strong>r “programming the radio<br />
control” cannot be <strong>de</strong>leted. It can only be overwritten (see “overwriting<br />
master”).<br />
1. Press the programming button on the master transmitter for 3 seconds.<br />
The curtain will “nod” to conirm.<br />
2. Now press the programming button of the transmitter to be <strong>de</strong>leted for 3 seconds.<br />
The curtain will “nod” to conirm.<br />
3. Then press the programming button of the transmitter to be <strong>de</strong>leted for a<br />
further 10 seconds.<br />
The curtain will “nod” to conirm.<br />
The transmitter has been <strong>de</strong>leted from the <strong>VC470</strong>.<br />
b) Deleting all transmitters (except master transmitter)<br />
1. Press the programming button on the master transmitter for 3 seconds.<br />
The curtain will “nod” to conirm.<br />
2. Press the programming button on the master transmitter for a further 3 seconds.<br />
The curtain will “nod” to conirm.<br />
3. Press the programming button on the master transmitter for a further 10 seconds.<br />
The curtain will “nod” to conirm.<br />
All transmitters (except master transmitter) have been <strong>de</strong>leted from the receiver.<br />
<strong>de</strong><br />
en<br />
fr<br />
nl<br />
25
Change language