GKN Driveline

GKN DrivelineIndustrial CV driveshaft applicationsService condition data sheetApplicationDescription of Application:Drive machine:Description:Shock factor:Driven machine:Description:Shock factor:Max. Operating DataMax. effective torqueon the driveshaft:NmMax. speedrpmMax. bending angle: vertical horizontal compoundDrive machine:Driven machine:Con.Operation/Nominal LoadsDesired lifetime:hPlease indicate a duty cycle reflecting the continuous operation of the driveshaft:(nominal values)No. Torque Speed Time share Compound operational bending Compound operational bending[Nm] [rpm] [%] angle at drive machine angle at driven machine123456Assembly Situation Length SpezificationAxial displacement/Length compensation:Required during operation:mmRequired axial displacementfor assembly or disassembly:Operating length (EL):mmmmOperating position: The joint on the upside is near:horizontal:Drive machine:vertical:Driven machine:inclined: at degreesWhich connection exist at thedrive - and driven machine?Environmental ConditionsMax. temperature: °CMax. continuous temperature: °CMin. temperature: °CAre there any special environmental conditions thedriveshaft has to operate in (for ex. aggressive chemicalor abrasive media etc...). Please describe.(please enclose sketches if available)Operating space:Max. rotation diameter:ELmmmmRequirementsAre there special requirements fortorsional stiffness and/or rotationalbacklash of the driveshaft?Please state on special requirementsthat the driveshaft has tofulfill in terms of manufacturing(for example painting/coating, balancingetc.)Please state on any other special/unusual serviceconditions for the driveshaft in your application?(f. ex. frequent load reversal, strong or high frequentvibrations/oscillations, high or repeated shock loads,continuous operation without load etc.)39