Redding Reloading Equipment 2020 Product Catalog

These top of the line single station presses
have the largest window opening and longest
usable ram stroke of any in their class.
The Big Boss II and
original Big Boss
Reloading Presses
Both the original Big Boss and the new Big Boss II reloading
presses have all the desirable features of the “Boss” reloading
press, but are built on heavier frames with a 1” diameter ram
and longer 3.8” usable ram stroke for reloading the largest
magnum cartridges.
The Big Boss II now features the unique Redding “Spent Primer
Collection System” used on the T-7 and Ultramag presses.
This top of the line single station press has the largest window
opening and longest usable ram stroke of any press in its class.
Simply, the only press you will ever need!
ITEM NO. 79000 Big Boss . . . . . . . . . . $310.60
(Big Boss Press supplied with “Boss” style primer catcher.)
ITEM NO. 97000 Big Boss II . . . . . . . . . $346.20
Both available in kit form with shellholder, and Series “A” die set
(excludes Deluxe Set). To order, replace XXX with the last three
numbers from the Series “A” dies (page 11)
ITEM NO. 79XXX Big Boss . . . . . . . . . . . $384.25
ITEM NO. 97XXX Big Boss II . . . . . . . . . $419.90
ITEM NO. 97601 Big Boss II ram only . . . $61.20
Optional bushing for 1”-14 threaded dies
ITEM NO. 70030. . . . . . . . . . . . . . . . . . . $29.25
“Spent Primer
Collection System”
Spent primers automatically drop through
the large diameter hollow ram into a handy
flexible plastic tube that can hold hundreds
of spent primers before emptying, or
be easily routed to your trash container.
“Smart Primer Arm”
“Smart” primer arm automatically swings
into position during the ram stroke and
flips out of the way when not in use. For
maximum sensitivity at the lowest possible
leverage, priming is done at the end of the
ram stroke.
Smart Primer Arm Assembly
Quickly change primer size by simply
exchanging the entire primer arm assembly.
ITEM NO. 99502 - Large. . . . . $19.80
ITEM NO. 99501 - Small. . . . . $19.80
New!
Both primer arm assemblies are now supplied with the T-7 and
Big Boss Presses. See page 30" - Primer Arm Assembly Update "
The Big Boss II –
Now featuring the unique Redding
“Spent Primer Collection System”
used on the T-7 and Ultramag presses.
Features:
• “Spent primer
collection system”
• 1” diameter ram
• Heavy duty cast
iron frame with
36° offset for easy
access and visibility
• Large 4-1/2" frame
opening
• 3-13/16" of ram stroke for easy reloading of magnum
cartridges
• Offset/straight pull ball handle for ease of operation
• "Smart" primer arm that moves in and out of position
with ram travel
• Heavy duty compound linkage
• Steel adapter bushing accepts all standard 7/8"-14
threaded dies and is removable for use with oversized dies
• Frame with bushing removed accepts 1-1/4" - 12 dies
29