Redding Reloading Equipment 2020 Product Catalog

Model 2400
Match Precision
Case Trimming
Lathe
The most noteworthy feature of the Model #2400
Case Trimming Lathe is the new Micrometer
which adds precision and repeatability to the
case length adjustment. Changes as little as
.001" can be easily "dialed in".
The innovative new push button chuck lock
simplifies loading and unloading while facilitating
perfect alignment of the case and pilot. The
design of the new push button chuck lock, combined
with the extended cast iron frame of the
Model #1400-XT, increases case length capacity;
accommodating not only the latest long action
cartridges but old time classics as well.
ITEM NO. 24000 . . . . . . . $301.25
New micrometer…
easy adjustments
Handy storage
holes for pilots
Micrometer Lock
Neck cleaning brushes and primer
pocket cleaners mount on frame
TiN Coated Replaceable Cutter
Model 2400 features:
• New micrometer…easy adjustments of .001".
• Cast iron frame to maintain precision alignment.
• New push button collet chuck is ideally suited
for use with optional power adapter.
• Handles 17 to 50 Cal, up to 3-1/4" case length.
Push button
chuck lock
• Universal collet fits all popular
cases – no others to buy.
• TiN (Titanium Nitride) coated
replaceable cutter.
• Storage holes for pilots.
Model 1400-XT Case Trimming Lathe
The Model #1400-XT Case
Trimming Lathe uses a cast
iron frame that has been
extended to handle all the latest
long action cartridges. The
frame is cast iron because it is a
perfect bearing surface, will not
wear out and will maintain its
precision and alignment for years
of service.
ITEM NO. 14000 . . . . . . . . $ 173.70
Redding "case trimming lathes" are the only case trimmers on the market
that turn the case and not the cutter. This feature guarantees a perfectly
square case mouth with every cut.
Both the Model #1400-XT and the #2400 Case Trimming Lathes are supplied
with the following:
• Universal collet fits all popular cases.
• TiN (Titanium Nitride) coated replaceable cutter.
• Six pilots - .22 cal., 6mm, 6.5mm, .270 cal.,
7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.
“The New 2400 Case Trimming Lathe is
another “Home-Run” for Redding.
Your equipment is very well thought out.”
Rich Maretzo
Model 1400-XT features:
• Cast iron frame to last a lifetime.
• Universal collet fits all popular
cases – no others to buy.
• Handles 17 to 50 Cal, up to 3"
case length.
• TiN (Titanium Nitride) coated
replaceable cutter.
• Coarse and fine adjustments for
case length.
• Storage holes for pilots.
3/16” Shank
Pilots may also
be used on
Hornady and
Forster
trimmers.
Universal
Collet accepts
all popular
cases – no
others to buy!
New replaceable
(TiN) Titanium
Nitride coated high
speed cutters.
Optional Power Adapter
with 1/4” hex for use with
cordless screwdrivers.
Works with both trimmers.
ITEM NO. #14025 . . . $20.40
32
ITEM NO. 14040 TiN Cutter (17 & 20 caliber)* . . $ 38.25
ITEM NO. 14045 TiN Cutter & Shaft Complete . . 48.25
ITEM NO. 14050 TiN Cutter (Standard) . . . . . . . . 38.25
ITEM NO. 15XXX Pilots . . . . . . . . . . . . . . . . . . $ 8.00
ITEM NO. 99301 Special Collet for 470 Nitro . . 28.25
Refer to die reference chart on pages 24, 25 & 26 for pilot number.
Item No.14045 assembly fits only Model 14 & 1400 Trimmers. The Model 2400 micrometer will not fit any other Trimmer.
* Note: Our 17 and 20 caliber pilots have a 5/32” shank, therefore, our #14040 cutter will interchange with RCBS.